Consumables

The Filtro Aria Hepa 13 CC1 Pro - 2 Pz is a pack of 2 replacement HEPA 13 air filters for the CC1 service robot, providing a filtration efficiency of over 99.95% for particles ≥ 0.3 microns. This Pro version ensures that CC1 meets cleanroom emission standards after cleaning tasks, effectively preventing secondary contamination in demanding environments such as hospitals and clean rooms.

The Spazzola Laterale Con Setole Lunghe CC1 (part no. P-C-C30) is a complete consumable kit for LeanRobot CC1 series robots, including 1 filter, 4 black rollers, and 2 red wiper sets. All components are wear parts designed for straightforward replacement during scheduled maintenance, minimising system downtime. Using genuine consumables ensures consistent cleaning performance throughout the robot's operating cycle.

The Red Rubber Blades SH1 (cod. P-C-S9) are consumable spare parts designed for the SH1 robot in the LeanRobot line, supplied in a 2-piece kit. They are intended for quick replacement of blades subject to wear during the robot's operating cycle. Their use ensures continuous system performance with minimal downtime.

The Blue Rubber Blades SH1 (cod. P-C-S8) are consumable spare parts designed for the SH1 robot of the LeanRobot line, supplied in kits of 2 pieces. Intended for quick replacement of blades subject to wear during the robot's operating cycle, they guarantee the maintenance of system performance while reducing machine downtime.

The Red Pad SH1 (code P-C-S6) is a replacement consumable designed for the Pudu SH1 scrubber-dryer robot, sold in a 2-piece pack. It ensures consistent cleaning performance on hard floor surfaces, maintaining the robot's operational efficiency during regular maintenance cycles.

Pack of 2 replacement HEPA 13 air filters for the CC1 service robot, delivering a filtration efficiency of over 99.95% for particles ≥ 0.3 microns. Designed to ensure that CC1 meets cleanroom emission standards after cleaning tasks, preventing secondary contamination in demanding environments such as hospitals and clean rooms. This consumable is specific to the CC1 model; regular replacement is required to maintain rated filtration performance.

Replacement dust bags for the CC1 robot vacuum system, supplied in a pack of 10 pieces. Original consumable designed to maintain the CC1 suction performance over time. Regular replacement ensures proper cleaning cycle operation in industrial environments. Compatible with the dedicated adapter P-C-C4 and suitable for use alongside the HEPA 13 filter P-C-C6 for complete filtration.

The Hard Scrubbing Roller Brush Red 2pcs (code P-C-C9) is a replacement consumable for Pudu CC1-series scrubber-dryer robots, supplied in a 2-piece pack. The hard bristle configuration delivers intensive scrubbing action on hard floor surfaces, supporting consistent cleaning performance across regular maintenance cycles. The roller design is engineered to mount on plates with a maximum thickness of 2 mm.

The Tubo (P-C-C23) is a consumable component designed for LeanRobot CC1 line systems. It ensures operational continuity of the suction circuit and is integrated into the standard machine maintenance cycle.

The Flow Meter of the Docking Station (P-C-C24) is a consumable spare part designed for the CC1 cleaning robot's docking station. It ensures accurate flow monitoring during the automatic water refill and discharge cycles, supporting the reliable operation of the self-cleaning system. Regular replacement of this component preserves the station's operational efficiency and the accuracy of its water change alerts.

The Adapter for Central Brush MT1 (code P-C-M6) is a dedicated replacement component for the MT1 service robot, designed to ensure correct mounting and operation of the central brush during cleaning cycles. As a category-specific consumable for the MT1 platform, it supports consistent brushing performance and facilitates routine maintenance interventions. Designed for use within the LeanRobot MT1 consumables line.

The MT1VAC Sealing Rubber - 6 Pairs (cod. P-C-M7) is a consumable spare parts kit designed for the MT1VAC robot in the LeanRobot line, supplied in a 6-pair pack. The sealing rubbers are intended for periodic replacement of components subject to wear during the robot's operating cycle. Using original spare parts ensures consistent system performance and operational continuity with minimal downtime.

The Dust mopping cloth MT1VAC - 6 pcs is the dedicated consumable for the dust mop mode of the Pudu MT1 VAC robot. The quick-release design enables tool-free replacement in seconds, reducing downtime during cleaning operations. The 6-piece pack ensures an adequate supply for facilities running continuous 24/7 cleaning cycles.

Pack of 2 replacement High Efficiency H11 air filters for the MT1 VAC service robot, providing a filtration efficiency of 95% for particles ≥ 0.3 microns. Designed to maintain consistent vacuuming performance during 24/7 continuous operation, these filters integrate with the MT1 VAC's modular quick-release system for tool-free replacement and minimal downtime.

The Lateral Brush Rubber CC1 (cod. P-C-C25) is a consumable spare part for LeanRobot CC1 series robots, supplied in a 2-piece kit. It is designed for quick replacement of lateral brushes subject to wear during the robot's operating cycle. Its use ensures continuous system performance with minimal downtime.

The Red Rubber for Brush CC1 (cod. P-C-C26) is a consumable spare part in the LeanRobot line, supplied in a 2-piece kit. Designed for quick replacement of wear-prone components during the CC1 robot's operating cycle, it ensures continuous system performance with minimal machine downtime.