Skip to Content
  1. Products
  2. Lean Logistic
  3. Containers, pallets and lids
  4. Base for Vario picking container

Base for Vario picking container

https://leanproducts.eu/web/image/product.template/3615/image_1920?unique=f741530

The Base for Vario picking container by Bosch Rexroth is made of sheet steel with a powder-coated finish in light grey RAL 7035, providing strength and durability in industrial logistics use. Available in standard and ESD versions, it supports a load capacity of up to 50 kg and is compatible with the SG 90 (90×149×315 mm) and SG 180 (180×149×315 mm) sizes. The ESD version makes it suitable for work areas with electrostatic protection requirements, extending its range of application in sensitive environments.

Read more ↓
Code: 3842526660
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Technical notes
  • Size
  • Surface treatment
  • Dimensions mm
  • ESD
  • Colour
  • Material
  • Brand
  • Version

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S5
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Technical notes Base for Vario picking container; load capacity 50 kg
Size SG 90 (90x149x315)
Surface treatment powder-coated
ESD yes
Dimensions mm 90x149x315
Colour light grey RAL 7035
Material Sheet steel
Brand Bosch Rexroth
Version standard
Tags
Tags
Bosch 5S5

You need three things: the material compartment profile cut to the length you want, this grip tab and filling spout set in the same size and, optionally, the funnel as an extension. To align the containers on the workstation, add the SG 90 or SG 180 base. We'll prepare the cut profiles for you.

It depends on the container width: the SG 90 for 90 mm wide containers, the SG 180 for 180 mm ones. If in doubt, send us the size of the compartment profiles: we'll confirm the base.

When the container is also ESD and the workstation is in an EPA area: that way the entire path of the parts stays dissipative.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The hammer-head nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.