Skip to Content
  1. Products
  2. AL Modular System
  3. Doors and hinges
  4. Handles and locks
  5. Door lock

Door lock

https://leanproducts.eu/web/image/product.template/2939/image_1920?unique=f20c9d2

Black die-cast zinc lock for guard doors made of strut profiles: version for 30x30 WG frame and version for hinged doors on 40, 45 and 50 profiles with slot C10, with all different or all identical keys.

Read more ↓
Code: 3842530353
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Surface treatment
  • Production method
  • Technical notes
  • Material
  • Type
  • Slot (mm)
  • Colour
  • Locking
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Material Die-cast zinc
Surface treatment Painting
Production method Die casting
Technical notes For frame 30x30 WG (EcoSafe); incl. 3 keys and M6 fastening
Colour signal grey RAL 7004
Type lock C10
Slot (mm) 10
Locking standard (different keys)
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

With standard locking each lock has a different key, assigned at random: suitable when each door should be opened only by whoever holds its key. With keyed alike locking all locks open with the same key: handy for maintenance staff working on several doors of the same line.

If the guard is made with the 30x30 WG frame profile, choose the lock for WG frames. If the door is on 40x40, 45x45 or 50x50 profiles with slot C10, choose the swing door version, which locks automatically when closed and only needs Ø 6.4 mm holes.

The lock prevents unauthorised opening, but it does not replace an interlocking device: if the door gives access to a hazardous area, a safety switch is required, according to the machine risk assessment.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The hammer-head nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.