GF-N outer end cap
Polyurethane outer end cap for Green Frame GF-N Ø 28 mm tubes: it fits over the end of the tube, closes it and rounds off the edge. It fits the standard profile, the C10 slot profile, the reinforced T profile and the Hard profile.
Green Frame · End caps and guards
GF-N outer end cap
The cap that fits over the end of the Ø 28 mm tube. It closes the profile, covers the sharp cut edge and gives a neat finish to uprights and crossbars. It fits GF-N profiles with a round cross-section, including those with a special inner section such as reinforced T, Hard and C10 slot.
Why choose it
No sharp edges
It covers the cut edge: hands, gloves and containers do not catch on the end of the tube.
One cap for several profiles
It fits standard GF-N and round profiles with a different inner section, where inner caps do not fit.
Fitted by hand
You fit it over the end of the tube, without tools.
Data and compatibility
| Parameter | Value |
|---|---|
| Part number | GFA-401 |
| Series | GF-N Ø 28 mm |
| Compatible with | GF-N profile, GF-N with C10 slot, GF-N reinforced T, GF-N Hard |
| Material | Polyurethane (PU) |
| Weight | 8 g |
| Assembly | Press-fit, from the outside of the tube |
The outer cap does not fit finned profiles (W, F35, F50): use an inner cap.
GF-N profileStandard GF-N profile
GF-N profile with C10 slotProfile with C10 slot
GF-N reinforced T profileReinforced T profile
GF-N Hard profileHard profile
GF-N ESD inner end capAlternatively: ESD inner end capDo you need the right end cap for your profiles?
Tell us which profiles you use and how many ends are left open: we will give you the codes and quantities.