Inner 90° connector GF-G
Internal 90° connector for GF-G Ø 43 tube: stays flush with the tube for clean structures and holds 1700 N slip load and 50 N·m bending. M8 bolt at 24.9 N·m, 158 g.
Green Frame · GF-G connectors Ø 43
Internal 90° connector GF-G
It has the same outside dimension as the Ø 43 tube: it slides into the cross member, clamps the upright and the joint stays clean, with nothing protruding. Use it where appearance matters but high loads are needed: 1700 N against slipping, 1000 N against pull-out, 50 N·m vertically. The clamping part also fits GF-N Ø 28 tube.
Why choose it
Clean joint
Same outside dimension as the Ø 43 tube, nothing protruding.
High strength
1700 N against slipping and 1000 N against pull-out.
Mixed series
The clamping part also fits GF-N Ø 28 tube.
Application example
Used in GF-G structures where the joint must stay clean.
- Frames of benches and workstations with a high load capacity
- Exposed shelving and supermarkets
Data and compatibility
| Item | Value |
|---|---|
| Series | GF-G Ø 43 |
| Type | Internal (flush with the tube), 90° joint |
| Compatible with | GF-G profile; the clamp also grips GF-N Ø 28 tubes |
| Material | Die-cast aluminium, steel fasteners |
| Weight | 158 g |
| Permitted loads | Slip 1700 N · pull-out 1000 N · moment 50 N·m vertical, 30 N·m horizontal |
| Tightening torque | 24.9 N·m (M8 bolt) |
| Screw | M8 × 30 steel |
| Part number | GFJ-209 |
Length of the cross member between GF-G uprights: overall length minus 126 mm (63 per side).
GF-G profileGF-G Ø 43 profile
External 90° connector GF-GExternal version, stronger
Internal 90° connector GF-G with GF-NInternal G-N for Ø 28 cross members
45° brace GF-N/G45° brace for use with this joint
Internal plug GF-GInternal plug GF-GNeed help choosing the connectors?
Send us a sketch of the structure: we will give you part numbers, quantities and cut lengths.