Internal connector for GF-N profile with C10 slot
Internal 90° connector for the GF-N profile with C10 slot (28 × 24 mm): it stays flush with the profile and is the typical connector for trolley bases. Steel fasteners, tightening torque 10.8 N·m, 35 g.
Green Frame · Connectors GF-N Ø 28
Internal connector for GF-N profile with C10 slot
The profile with C10 slot has a different cross-section from round tube (28 × 24 mm): to join it at 90° while staying flush you need this dedicated connector. On its sides it has the same grip as the tube rib, so you can mount other connectors on it. It is used above all in trolley bases, where plate-mounted castors are fixed under the slotted profile.
Why choose it
Dedicated to the slotted profile
It has the same outer cross-section as the C10 profile: the joint stays clean.
Side attachments
On the sides you mount other connectors, as on the tube rib.
Trolley bases
The typical connector for base frames on which plate-mounted castors are fixed.
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | Internal (flush with the profile), 90° joint |
| Compatible with | GF-N profile with C10 slot; also clamps GF-G Ø 43 tubes |
| Material | Die-cast aluminium, steel fasteners |
| Weight | 35 g |
| Permissible loads | Sliding 350 N · pull-out 350 N · moment 3 N·m vertical, 4 N·m horizontal |
| Tightening torque | 10.8 N·m |
| Screw | M6 × 16 steel |
| Part number | GFJ-255 |
It holds less than half of the internal connector for round tube: where more strength is needed, add the 90° reinforcing bracket.
GF-N profile with C10 slotCompatible profile
90° reinforcing bracket GF-NReinforcing bracket for the joint
Insert for C10 slot GF-NInsert for the C10 slot
GF-N reinforced inner plug for C10 slotted profilePlug for the slotted profile
Internal 90° connector GF-NVersion for round tubeNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.