LongLife - Remover, Cleaner, Primer & Edge Sealing

On tiles, stone floors, glass, ceramics and exposed-aggregate concrete slabs. Besides the adhesive residue left by floor markings, it also removes oil and tar.

It is mandatory with LongLife Outdoor, and LongLife Grip is applied with Primer outdoors. For the other LongLife products it is recommended on critical surfaces, where adhesion is difficult.

It seals the edges of floor markings and stops moisture from getting under the tape, for example in outdoor areas. One 140 ml tube covers about 10–15 m.

Cleaner and Remover in packs of 6 × 1 L bottles, Primer in a 1 L can, edge sealing in a 140 ml tube.

The floor must be even, clean and free of dust, oil and grease. First clean thoroughly, then degrease the application strip with LongLife Cleaner. Remove old markings with the scraper and adhesive residue with LongLife Remover. On critical surfaces, such as porous or dusty concrete, LongLife Primer increases adhesion; outdoors it is always required.

Yes. According to ORGATEX, LongLife markings can be removed without residue using LongLife Remover. Markings are lifted with the LongLife scraper, 1200 mm long so you can work standing up, with a 125 mm blade and 3 spare blades; adhesive residue is dissolved with the Remover. On delicate floors test it in a hidden spot first.

Yes, with the right products. For aisles, loading areas and walkways on asphalt or concrete there is LongLife Outdoor (codes LGOD50, LGOD75 and LGOD100, white -02 or yellow -04): 2.8 mm polyurethane, reflective and anti-slip even when wet, for pedestrians, pallet trucks and forklifts. For outdoor locations there are LongLife Modul L corners (LGMOD-L), fixed with anchors. Low Duty also suits sheltered outdoor areas and the fabric tape temporary marking; the other lines are for indoor use. Outdoors LongLife Primer is always required and edge sealing protects against moisture.