Pudu GT7
The PUDU GT7 is the reel robotic mower of the GT series for high-quality cutting on golf courses and sports fields: three floating cutting units across 160 cm and turf stripes set by you.
RTK positioning with ±2.5 cm precision, 4×4 drive up to 30° slopes, low-noise electric operation and IP66 protection. LeanProducts, official PUDU distributor in Italy, handles site survey, mapping and installation.
PUDU · Precision robotic mower
PUDU GT7: cylinder robotic mower for sports pitches and golf
The GT series robotic mower for quality cutting: three floating cylinder cutting units over 160 cm, RTK positioning accurate to ±2.5 cm and turf stripes set by you. 4×4 drive up to 30° slopes and low-noise electric operation. For golf courses, professional sports pitches and sites where noise matters. LeanProducts, official PUDU distributor in Italy, handles site survey, mapping, installation and seasonal support.
Why choose it
Precision cylinder cutting
Three independent, floating cylinder cutting units (triplex) follow the ground profile: constant cutting height even on undulating pitches.
RTK ±2.5 cm
RTK, LiDAR and vision together: precise, repeatable paths, ±2.5 cm in supported conditions.
Professional pitch stripes
You set cutting angles, turns and lane spacing: the GT7 plans the route and draws the stripes typical of sports pitches and greens.
Quiet
Electric and low-noise: you can mow early in the morning or in the evening, near hospitality facilities or during activities, without disturbing anyone.
Choose it if…
- You maintain golf courses or natural-grass sports pitches.
- Cut quality matters: constant height and regular stripes.
- The ground is undulating or sloping, up to 30°.
- You need to mow at times when noise matters.
Choose another solution if…
- You need to cover large lawns and output matters more than finish: Pudu GT5 →
- The site is small or mixed and you also need to sweep the paths: Pudu GT3 →
Where it works
The GT7 is designed for quality cutting:
- Golf courses: greens and areas that need constant cutting height and a uniform finish
- Professional sports pitches: turf stripes to the pitch standards
- Facilities with several pitches: the robot moves on its own from one pitch to another along internal routes
- Noise-sensitive sites: hospitality facilities, residential areas, facilities in operation
The floating cutting units follow the undulations of the ground, so the cutting height stays uniform even where the pitch is not perfectly flat.
See it at work
Pudu GT7 at work
Cut quality
Stripes and cutting angles
Cutting angles, turns and lane offsets are configurable: the route is planned automatically for regular stripes.
Floating units
Three independent cylinder cutting units, with articulated suspension, follow the ground contours for a uniform cutting height.
Tool-free cutting height
It is adjusted with a knob, in a few minutes, without tools.
Navigation and terrain
RTK, LiDAR and vision
Positioning accurate to ±2.5 cm in supported conditions and stable navigation for work without manual intervention.
4×4 drive, up to 30°
All-wheel drive for slopes and undulating ground, without wheel slip.
Obstacle avoidance
It recognises lawn boundaries, pedestrians, vehicles and animals and stops, waits or detours.
Collection and unloading
Suction collection
It vacuums cut grass, leaves and light debris while cutting: the pitch stays clean in a single pass.
Unloading and resumption
Depending on the configuration, when the container is full it goes to unload on its own and resumes from where it stopped.
With collection switched off the GT7 works almost silently.
Routes, pitches and remote control
How you set up the GT7’s work:
Planned routes
The GT7 plans the route on its own based on the cutting angles, turns and lane spacing you set.
Transit between pitches
It moves from one pitch to another along predefined internal routes and resumes cutting on arrival.
Remote monitoring
The GT7 is designed for remote monitoring of position, work progress and robot status, with immediate error notifications.
Manual driving
For transfers or special jobs you drive it yourself.
We confirm the tools and access methods for remote monitoring with the configuration. A single PUDU ecosystem for cleaning, delivery, logistics and now grounds maintenance too: one supplier and one point of contact in Italy.
What to ask us first
Pitches and turf
Number and size of the pitches, type of grass, required cutting height and slopes: we check with you whether the GT7 is suitable.
RTK signal
The ±2.5 cm accuracy applies in supported conditions: during the site survey we check reception at your facility.
Availability and configuration
The GT series was presented in September 2026: we confirm lead times and configurations for Italy on request.
Data, security and compliance
A robot in your company must be safe for your data too. This is how it is protected:
Information security
PUDU is certified ISO/IEC 27001 for information security and ISO/IEC 27701 for privacy (certification body DNV): encrypted data, controlled access and a dedicated security department.
Privacy and GDPR
Cameras and sensors are used to find the way and avoid obstacles. We provide the privacy documentation for the model with the quote.
Data kept on site with PUDU Cloud Veil
If data must not leave the company, with PUDU Cloud Veil it runs locally or on your private cloud, without passing through PUDU servers. We define the configuration for your model in the quote.
CE marking and standards
The robot comes with CE marking and an EU declaration of conformity.
Settings and working modes are password-protected: unauthorised staff cannot change them.
The LeanProducts service
From the first site survey to the mowing season, with a single point of contact:
Survey of the green area
Together we look at lawns, paths, slopes, banks, obstacles and access points and tell you whether the GT7 is the right GT model.
Mapping and installation
We map the areas, set up no-go zones, routes between zones and the unloading point, and commission the robot.
Training
We train whoever looks after the robot: work scheduling, manual driving, cleaning and routine checks.
Seasonal support
We support you during the mowing season and at restart: direct support in Italy, by phone, remotely or on site, and original PUDU spare parts.
LeanProducts is the official PUDU distributor in Italy.
Technical data
| Item | Value |
|---|---|
| Type | Commercial precision cylinder robotic mower |
| Cutting | Cylinder triplex: 3 independent, floating units; 160 cm (62") width; 125 mm cylinders with 8 or 11 blades |
| Floating units | Travel: pitch 20.5°, roll 14°, yaw 10° |
| Cutting height | 5–50 mm, knob-adjustable, tool-free |
| Output | About 8,000 m²/h (2 acres/h) |
| Maximum speed | 11 km/h (3 m/s) |
| Drive and slope | 4×4, up to 30° (58%), including across the slope |
| Battery | 26 kWh, LFP (lithium iron phosphate) |
| Battery life | 10–12 h; up to 12 h without collection |
| Area on one charge | Up to 70,000 m² (17 acres), without collection |
| Charging | 8 h standard (3 kW); 4 h with the optional fast charging (6 kW) |
| Navigation | RTK + 3D LiDAR + vision; RTK accuracy ±2.5 cm in supported conditions; maps up to 1,000,000 m² |
| Routes | Configurable cutting angles, turns and lane offsets, for turf stripes; autonomous transit between pitches |
| Collection | Twin-fan suction of grass, leaves and light debris; 1,560 mm collection width; 120 L container with full detection; autonomous unloading and work resumption |
| Noise level | Electric, low-noise; almost silent with collection switched off |
| Recognition | People, vehicles, animals, lawn boundaries and obstacles, with RGB and RGB-D cameras, ultrasonic sensors and 3D LiDAR |
| Remote management | Fleet management: position, work progress, robot status and error notifications |
| Dimensions (W × D × H) | 1950 × 1600 × 1400 mm; 1950 × 1500 × 1400 mm with the units raised |
| Weight | 900 kg with batteries |
| Load platform | 120 kg |
| Construction | All-metal body, commercial-grade steel frame |
| Protection rating | IP66 |
| Safety | Emergency stop |
Data for the GT series presented in September 2026. Maximum battery life and area per charge apply without collection: actual values depend on pitches, grass and slopes and we estimate them with you during the site survey.
GT Series charging stationAutomatic charging for GT3, GT5 and GT7
Pudu GT5Mower for large lawn areas
Pudu GT3Compact mower that also sweeps the pathsWant to find out whether the GT7 is right for your pitches?
Together we survey the pitches, check slopes and RTK signal and propose the right configuration, with mapping, installation, training and seasonal support.
