Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Connectors and fittings
  5. Connection kit

Connection kit

https://leanproducts.eu/web/image/product.template/3566/image_1920?unique=1d9bc53

Connection kit for slot C10: two 52 mm long zinc-plated steel elements, with M8 threads and screws included, for the end-to-end connection of two profiles working in the slots. Tightening torque 18 Nm.

Read more ↓
Code: 3842529881
  • Brand
  • Slot mm
  • Technical notes
  • Length mm
  • Tightening torque Nm
  • Material

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S7
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Technical notes Set of 2 pieces incl. 4x screws M8x12
Tightening torque Nm 18
Length mm 52
Slot mm 10
Material Zinc-plated steel
Tags
Tags
Bosch 5S7

The kit is shorter: two 52 mm elements with two M8 threads each, tightening 18 Nm. The profile connector 180 for slot C10 is 180 mm long, has four M8 threads and is tightened to 25 Nm.

For a stable connection, put one element in each slot of the joint: with a four-slot profile you need two kits.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.