Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Connectors and fittings
  5. Quick connector slot 6, 0°/90°

Quick connector slot 6, 0°/90°

https://leanproducts.eu/web/image/product.template/2916/image_1920?unique=1d9bc53

Stainless steel quick connector for 20 series profiles with slot C6: joins two profiles at right angles and, with its square head, works both as a 0° and a 90° connector. Bush D8, 450 N, tightening 2.5 Nm.

Read more ↓
Code: 3842537013
  • Brand
  • Production method
  • Slot mm
  • Load capacity Fmax N
  • ESD
  • Tightening torque Nm
  • Diameter mm
  • Moment Mmax Nm
  • Material

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5SP
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Production method Moulding
ESD yes
Diameter mm 8
Load capacity Fmax N 450
Tightening torque Nm 2.5
Moment Mmax Nm 18
Slot mm 6
Material Stainless steel
Tags
Tags
Bosch 5SP

Thanks to the square head, the same code mounts in the 0° or 90° orientation: in slot C6 you don't have to choose between two items, as you do for the connectors for slots C8 and C10.

A blind or through D8 hole near the end of the profile, where the bush goes. The drilling jig helps you make it in the right position.

The round head lets you rotate the connected profile, but in slot C6 it holds less: 250 N and 6 Nm versus 450 N and 18 Nm for this connector.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.