Skip to Content
  1. All Products
  2. AL Modular System
  3. Strut profiles
  4. Aluminium strut profile Ø28

Aluminium strut profile Ø28

https://leanproducts.eu/web/image/product.template/2796/image_1920?unique=1d9bc53

Aluminium round tube profile Ø 28 mm for shelf and workstation crossbars: fixed with angles to profiles with 10 mm slot. 0.7 kg/m, 6070 mm bar or cut to length from 50 mm.

Read more ↓
Code: 3842993317
Length: 6,070
  • Brand
  • Max length mm
  • Alloy
  • Production method
  • Surface treatment
  • Coefficient of thermal expansion
  • Tensile strength
  • Yield strength
  • Elongation at break
  • Modulus of elasticity E
  • Brinell hardness
  • Straightness tolerance
  • Torsion tolerance
  • Min length mm
  • Length
  • Material

Cut dimensions

mm
Ø 28 mm Real profile section
0Full bar 6070 mm
Calculating price…
Full bar Full sheet of the sheet From {min} to {max} mm · full bar {max} mm Up to {maxl} × {maxw} mm · minimum {min} mm Length between {min} and {max} mm. Width between {min} and {max} mm.

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Max length mm 6070
Alloy EN AW-6063 (Al MgSi)
Production method Extrusion
Surface treatment Anodising E6/EV1, 12 µm, 300 HV
Coefficient of thermal expansion 23.4 × 10⁻⁶ 1/K (+20…100 °C)
Tensile strength 245 N/mm²
Yield strength 195 N/mm²
Elongation at break 10%
Modulus of elasticity E 70000 N/mm²
Brinell hardness 75 HB
Straightness tolerance max 0.75 mm/m
Torsion tolerance max 0.70 mm/m
Min length mm 50
Length 6070
Material Anodized aluminium

On a profile with 10 mm slot, with the 60x47x4 zinc-plated steel support angle, height-adjustable, or with the die-cast aluminium T-connector D28, which has no protruding contours. Both use the S8x25 self-tapping screw.

Up to 40° relative to the horizontal section if the structure is made of D28 round tube profile, up to 30° with the D28x55 support profile.

Yes: replace the Ø 28 aluminium tube with a longer or shorter piece. The tube is the Ø 28 aluminium profile and we cut it to length.

No: it is a modular system profile, with its own angles and connectors for profiles with 10 mm slot. If you need a tube system with dedicated connectors, ask us for the Green Frame solution.

The D28 is the single tube: 0.7 kg/m and Ix = Iy = 1.5 cm⁴. The D28x55 weighs 1.6 kg/m and reaches Iy = 88.3 cm⁴: you choose it for the most heavily loaded cross members. Both are fixed with dedicated brackets.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.