Skip to Content
  1. All Products
  2. AL Modular System
  3. Feet and wheels
  4. Accessories for feet
  5. Base plate with floor fixing hole

Base plate with floor fixing hole

https://leanproducts.eu/web/image/product.template/2923/image_1920?unique=1d9bc53

Black-painted die-cast zinc base plate with a hole for fixing it to the floor: Ø 59 or 79 mm, round or oval, load capacity 30000 N. Combined with a spindle from the modular levelling feet for profiles with slot C8 and C10.

Read more ↓
Code: 3842538679
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Colour
  • Load capacity Fmax N
  • Surface treatment
  • Technical notes
  • Material
  • Diameter
  • Slot mm
  • Length mm
  • Brand
  • Shape

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Colour black
Load capacity Fmax N 30000
Material Zinco pressofuso verniciato a polvere
Surface treatment powder-coated
Technical notes Piastra ovale con foro di avvitamento ø12; a=52 mm
Diameter 59
Slot mm 8/10
Length mm 100
Brand Bosch Rexroth
Shape oval
Tags
Tags
Bosch 5S1

No, it is the base of a modular levelling foot: it must be combined with an M8, M12 or M16 threaded spindle, which screws into the threaded central bore of the profile. Tell us the thread and stroke you need and we will recommend the spindle.

In the round plate the Ø 9 hole is close to the centre, at 21 mm on the Ø 59 and at 31 mm on the Ø 79. The oval one, 100 mm long, has the Ø 12 hole at 52 mm: the anchor sits further from the spindle. Check that the hole suits the anchor you use.

This plate only rests on the floor. If you need to anchor the foot, use the base plate with screw hole, Ø 59 or 79 mm, and a wall plug.

The levelling foot M8 has no anchoring hole. If the structure must be fixed to the ground, use a base plate with fixing hole and the floor anchor.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.