Skip to Content
  1. Home
  2. Products
  3. Green Frame

Green Frame

Green Frame by SUS · Aluminium tube system

Not sure which to choose? Read the guide and use the selector →

Aluminium tube system for workstations, racks and trolleys

Ø 28, 19 and 43 mm profiles cut to length, connectors, karakuri moving parts, levelling feet, castors and gravity roller tracks: build and modify your lean structures with no welding and no painting. Choose in three steps: what you build, which series, which requirement.

Read more ↓
    GF-N Ø 28 mm
    GF-S Ø 19 mm
    GF-G Ø 43 mm
    Feet and castors
    Gravity roller tracks
Standard
Sort by: Featured

Green Frame

GF-G profile

Ø 43 tube cut to length from 100 to 4000 mm

GF-G profile with C10 slot

Ø 43 tube with C10 slot for inserts, hooks and accessories

GF-G P150 high-rigidity profile

Twin Ø 43 beam at 150 mm centres for large spans

GF-G W profile

Twin Ø 43 tube for areas needing more rigidity

GF-G Hard profile

Thick-walled Ø 43 tube for joints subject to impacts

GF-G C10 connector kit for SF profile

Connects the GF-G tube with C10 slot to the SF profile

Outer 90° connector GF-G

Joins two Ø 43 tubes at 90° with a single M8 bolt

External 90° connector GF-G with GF-N

Joins a Ø 43 tube to a Ø 28 tube at 90° from the outside

Inner 90° connector GF-G

90° connector flush with the Ø 43 tube, for clean finishes

Internal 90° connector GF-G with GF-N

Flush 90° connector between a Ø 43 tube and a Ø 28 tube

Outer 90° corner connector GF-G

Closes 90° L-corners between Ø 43 pipes

External 45° connector GF-G

Joins two Ø 43 tubes at a 45° angle from the outside

External 90° connector M double reinforcement GF-G

Maximum resistance to bending moments on Ø 43 joints

External 90° connector H reinforced GF-G

More resistant to bending moments than the standard 90°

Internal hinged connector 0-180° GF-G

Flush connector adjustable to any angle, Ø 43 tube

Linear connector GF-G

Joins two Ø 43 tubes end to end from the inside

Inner end cap GF-G

Closes the end of the Ø 43 tube from the inside

Inner end cap GF-G with C10 slot

Closes the end of the GF-G profile with C10 slot

Protective cap GF-G

Covers the end of the Ø 43 tube and protects it from impacts

Slot cover GF-G

2 m bar that covers the rib and protects the tube

3 di 240 results
Load more products