Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Screws and anchors
  5. Eye bolt M12 for lifting frames

Eye bolt M12 for lifting frames

https://leanproducts.eu/web/image/product.template/3558/image_1920?unique=1d9bc53

Eye bolt M12x40 for lifting aluminium strut profile frames: it screws into the M12-threaded central hole of the profile or, with the plate, onto the 40x80, 45x90, 80x80 and 90x90 sections. Eye bolt load capacity 7500 N.

Read more ↓
Code: 3842564729
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Brand
  • Colour
  • Thread
  • Load capacity Fmax N
  • Tightening torque Nm
  • Technical notes
  • Material
  • Dimensions mm
  • Length mm
  • Version

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Colour orange
Thread M12
Material Blackened steel
Dimensions mm 40x80
Load capacity Fmax N 7500
Tightening torque Nm 25
Technical notes Vite ad anello per sollevare telai; occhiello laccato arancione; carico 750 kg (1 fune vert.)
Length mm 40
Version Screw M12x40
Tags
Tags
Bosch 5S1

The screw alone goes into the M12-threaded central hole of a profile with slot C10. On the multiple profiles 40x80, 45x90, 80x80 and 90x90, choose the plate version of the same section: the plate is fastened with two or four M12x40 screws (included) and carries the eye.

Yes: the central hole of the profile must be tapped M12 to take the screw. Plan for it before assembling the structure.

The M12x40 eye bolt has a load capacity Fmax of 7500 N. This is a static limit value: take into account the frame weight, the rope angle and the safety factors required for lifting.

It depends on the weight, size and centre of gravity of the structure. Attach the frame at several points so that it stays balanced and the load on each screw stays below its capacity.

The screw alone on profiles with slot C10 and an M12-threaded central hole. The plate version on the 40x80, 45x90, 80x80 and 90x90 sections.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.