Outer 90° connector GF-G
External 90° connector for GF-G Ø 43 tube: wraps around the end of the cross member and fixes it to the upright with a single M8 bolt. 2500 N slip load and 66 N·m bending. Torque 24.9 N·m, 195 g.
Green Frame · GF-G connectors Ø 43
External 90° connector GF-G
This is the basic joint of the GF-G series: 90° joints between Ø 43 tubes are made with this connector or with the internal version. Just tighten a single M8 bolt. It withstands much more than Ø 28 joints: 2500 N against slipping and 66 N·m vertically. The clamping part also fits GF-N Ø 28 tube.
Why choose it
High strength
2500 N against slipping: more than three times a Ø 28 joint.
Heavier cantilevers
66 N·m vertically at the root of an arm.
Mixed series
The clamping part also fits GF-N Ø 28 tube.
Application example
Used in GF-G structures for heavy loads.
- Reinforced frames for benches and workstations
- Shelving and supermarkets carrying heavy loads
- Uprights for cantilever arms and brackets
Data and compatibility
| Item | Value |
|---|---|
| Series | GF-G Ø 43 |
| Type | External (wraps around the tube), 90° joint |
| Compatible with | GF-G profile; the clamp also grips GF-N Ø 28 tubes |
| Material | Die-cast aluminium, steel fasteners |
| Weight | 195 g |
| Permitted loads | Slip 2500 N · pull-out 690 N · moment 66 N·m vertical, 15 N·m horizontal |
| Tightening torque | 24.9 N·m (M8 bolt) |
| Screw | M8 × 30 steel |
| Part number | GFJ-014 |
Length of the cross member between GF-G uprights: overall length minus 126 mm (63 per side).
Related products
GF-G profileGF-G Ø 43 profile
Internal 90° connector GF-GInternal version, flush
External 90° connector M double reinforcement GF-GGM version, double reinforcement
External 90° connector H reinforced GF-GReinforced GH version
Long 45° brace GF-NMatching long 45° brace
Internal plug GF-GInternal plug GF-GNeed help choosing the connectors?
Send us a sketch of the structure: we will give you part numbers, quantities and cut lengths.