Long 45° brace GF-N
Long 45° brace for 90° joints between Ø 28 tubes: the longer strut takes the joint strength to 95 N·m, more than double the standard brace. For loaded cantilevers; it also pairs with the GF-G outer 90° connector.
Green Frame · Connectors GF-N Ø 28
Long 45° brace GF-N
Same principle as the 45° brace, with a longer arm: the joint reaches 95 N·m in bending and 1150 N against slipping. At 300 mm reach that is about 32 kg per arm. It is used for loaded shelves, cantilever surfaces and gantry trolleys; it also works together with the GF-G outer 90° connector.
Why choose it
More than double
95 N·m versus the 40 N·m of the standard brace.
Added to the joint
You fit it under an existing joint.
Also with GF-G
Pairs with the GF-G outer 90° connector.
Application example
Used under the most heavily loaded joints.
- Loaded cantilever shelves and surfaces
- Gantry trolleys and tall structures
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | Long 45° brace (strut under the 90° joint) |
| Compatible with | 90° joints between GF-N Ø 28 tubes; also clamps GF-G Ø 43 tubes, with the GF-G outer 90° connector |
| Material | Die-cast aluminium, aluminium bolt |
| Weight | 156 g |
| Permissible loads | Slip 1150 N · moment 95 N·m |
| Tightening torque | 11 N·m (5 mm hex key) |
| Screw | M6.5 × 18 in aluminium |
| Part number | GFJ-D45 |
Load per arm = moment ÷ reach: 95 N·m ÷ 0.3 m ≈ 317 N at 300 mm, ≈ 190 N at 500 mm.
45° brace GF-N/GStandard 45° brace
Outer 90° connector GF-NOuter 90° connector
Outer 90° connector GF-GOuter 90° connector GF-G
Reinforced outer 90° connector GF-NReinforced outer connectorNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.