Outer 90° corner connector GF-G
Outer L-shaped corner connector for GF-G Ø 43 pipe: wraps around the ends of two pipes and closes the corner at 90°. Allows 170 N·m in vertical bending. Steel M8 fasteners, 330 g.
Green Frame · GF-G Ø 43 connectors
Outer 90° corner connector GF-G
Joins the ends of two Ø 43 pipes in an L-shaped corner, wrapping them from the outside: no pipe protrudes beyond the corner. In the plane of the corner it is very rigid, 170 N·m vertically; sideways it allows 9 N·m, so the structure must be braced. Used for base frames, portals and corners of GF-G structures.
Why choose it
Closed corner
Both ends stay inside the joint: no end caps needed at that point.
Rigid in its plane
170 N·m in vertical bending.
M8 fasteners
Steel screws, 24.9 N·m.
Application example
Used in the corners of GF-G structures.
- Base frames and portals in Ø 43 pipe
- Corners of trolleys and reinforced structures
Data and compatibility
| Parameter | Value |
|---|---|
| Series | GF-G Ø 43 |
| Type | Outer corner connector (wraps the pipe), 90° L-corner |
| Compatible with | GF-G profile Ø 43 |
| Material | Die-cast aluminium, steel fasteners |
| Weight | 330 g |
| Permissible loads | Pull-out 260 N · moment 170 N·m vertical, 9 N·m horizontal |
| Tightening torque | 24.9 N·m (M8 bolt) |
| Screw | M8 × 30 in steel |
| Part number | GFJ-016 |
Pipe length: overall frame length minus 94 mm (47 per side).
GF-G profileGF-G Ø 43 profile
Outer 90° connector GF-GOuter 90° connector GF-G
Outer 45° connector GF-GOuter 45° connector GF-G
Outer 90° corner connector GF-NOuter corner connector for Ø 28 pipeNeed help choosing the joints?
Send us a sketch of the structure: we will tell you part numbers, quantities and cut lengths.