Cross connector GF-N/G
Cross connector for Ø 28 pipes: it locks two pipes that cross one over the other at 90°, without cutting them. For support cross members, roller track supports and grids. M6.5 × 38 screw, 11 N·m, 800 N against slipping.
Green Frame · Connectors GF-N Ø 28
Cross connector GF-N/G
When two pipes cross on different planes, the cross connector clamps them at the crossing point: neither of them has to be cut and the position can be moved whenever you want. It is used for support cross members under roller tracks, grids, shelves on uprights and added supports. It holds 800 N against slipping, like a 90° connector.
Why choose it
No cuts
The pipes pass through whole: the connector moves along both.
800 N against slipping
Like a standard 90° connector.
Also on GF-G
Also clamps Ø 43 tube.
Application example
Used where two pipes cross on different planes.
- Support cross members under roller tracks
- Grids and shelves with cross bars
- Shelves and supports added to existing structures
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28, also clamps GF-G Ø 43 |
| Type | Cross type, pipes overlapping at 90° |
| Compatible with | GF-N Ø 28 and GF-G Ø 43 pipes |
| Material | Die-cast aluminium, aluminium bolt |
| Weight | 87 g |
| Permissible loads | Slip 800 N · moment 10 N·m vertical, 6.5 N·m horizontal |
| Tightening torque | 11 N·m (5 mm hex key) |
| Screw | M6.5 × 38 in aluminium |
| Part number | GFJ-A11A |
Slip: load that pushes the tube along the upright. Pull-out: load that pulls the tube out of the connector. Moment: bending at the root of a cantilever arm.
GF-N profileStandard Ø 28 tube
Reinforcement for cross connector GF-NReinforcement for the cross connector
Rotating cross connector GF-NRotating cross connector, at any angle
Parallel connector P15 GF-N/GP15 double connector, can be combinedNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.