Worktop support GF-N
Aluminium support that fixes the worktop on top of the GF-N Ø 28 mm tube frame: it clamps onto the tube and the worktop is screwed on from below. It holds 260 N and works with both inner and outer connectors.
Green Frame · Panels, doors and closures GF-N
Worktop support GF-N
This is the worktop clamp that holds the worktop on the frame of workbenches, workstations and trolleys. It clamps onto the Ø 28 tube and the worktop is screwed on from below: each support takes 260 N of load and 250 N against sliding.
Why choose it
Worktop held firmly
The worktop does not move when you push or pull parts across the bench.
With any connector
Works on frames built with either inner or outer connectors.
Moves in a moment
Loosen it, slide the support along the tube and retighten: you change the worktop without drilling the frame.
Application example
Use it wherever you need a worktop resting on a Ø 28 tube frame.
- Workbenches: assembly, testing or packing tops
- Trolleys: fixed shelves on the frame
- Workstations: shelves and set-down surfaces
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Compatible with | GF-N Ø 28 tube; frames with inner or outer connectors |
| Material | Extruded aluminium |
| Weight | 18 g |
| Working load | 260 N per support; 250 N against sliding; torque 13 N·m |
| Position | First support 80–200 mm from the corner, then maximum spacing 500 mm |
| Worktop hole | 37.5 mm from the tube axis |
| Part number | GFJ-A22 |
With long worktops or heavy loads, increase the number of supports, keeping to the maximum spacing of 500 mm.
GF-N profileTube it mounts on
Inner 90° connector GF-NInner frame connector
Slot cover GF-NSlot cover to use with it
Worktop fixing GF-GVersion for GF-G Ø 43 tubeNeed to close a structure with panels or doors?
Send us the dimensions and photos of the structure: we will tell you which hinges, closures and panel holders you need, and how many.