Internal 90° connector for GF-N Hard profile
Internal 90° connector dedicated to the thick-walled GF-N Hard profile: it stays flush with the tube and has the grip for other connectors on its sides. It is recognisable by the engraved “H”. Tightening torque 11 N·m, 38 g.
Green Frame · Connectors GF-N Ø 28
Internal 90° connector for GF-N Hard profile
The GF-N Hard profile has the same outside dimension as the standard tube but thicker walls, so it needs a dedicated internal connector: this is it, with an engraved “H” to tell it apart. On its sides it has the grip shaped like the tube rib, for fixing other connectors.
Why choose it
Dedicated to the Hard profile
It fits into the thick-walled profile and the joint stays flush.
Easy to recognise
The engraved “H” prevents mix-ups with the standard connector during assembly.
Side attachments
You can mount other connectors on its sides.
Application example
Used in Hard profile structures where the joint must stay clean.
- Trolley frames subject to knocks
- Structures with flush cross members in thick-walled profile
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | Internal (flush with the tube), 90° joint |
| Compatible with | GF-N Hard profile; also clamps GF-G Ø 43 tubes |
| Material | Die-cast aluminium, aluminium bolt |
| Weight | 38 g |
| Tightening torque | 11 N·m (5 mm hex key) |
| Part number | GFJ-F24 |
On the Hard profile the GF-N external 90° connector also works, if you do not need a flush joint.
GF-N Hard profileCompatible profile
GF-N inner plug for Hard profilePlug for the Hard profile
External 90° connector GF-NExternal alternative
Internal 90° connector GF-NVersion for the standard tubeNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.