Skip to Content
  1. All Products
  2. AL Modular System
  3. Other accessories
  4. Lettering clip

Lettering clip

https://leanproducts.eu/web/image/product.template/3619/image_1920?unique=1d9bc53

Rigid PVC label holder clip for marking profiles with slot C8 or C10 and D28 round tube cross members: 2000 mm to cut or 102 mm pieces. For workstations, shelving and tidy lines.

Read more ↓
Code: 3842537652
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Technical notes
  • Height mm
  • Profile
  • Slot mm
  • Colour
  • Material
  • Brand
  • Length mm

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S5
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Technical notes Self-adhesive clip, rounded surface, for D28, D28L, D28L N10, D28x55
Height mm 38
Colour incolore trasparente
Profile tube D28, rounded surface
Slot mm 10
Material Rigid PVC
Brand Bosch Rexroth
Length mm 2000
Tags
Tags
Bosch 5S5

The one for the profile it goes on: slot C8, slot C10 or round tube D28. For round tubes choose the rounded surface, which follows the tube, or the flat one, easier to read head-on.

The 102 mm pieces are ready for a single label. You cut the 2000 mm bar yourself, for example for a row of locations along a whole shelf.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.