Skip to Content
  1. All Products
  2. AL Modular System
  3. Mounting of surface elements
  4. Smooth black ESD polystyrene panel, 5 mm thick
Pannello in polistirene liscio nero ESD, spessore 5 mm

Smooth black ESD polystyrene panel, 5 mm thick

https://leanproducts.eu/web/image/product.template/2775/image_1920?unique=1d9bc53

Black smooth polystyrene panel in ESD version, 5 mm thick: for closing aluminium strut profile frames, worktops and walls of workstations in electrostatic protected areas.

Read more ↓
Code: LP-PLGESD5

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

At 5 mm thick you have three options: the glazing profile in 8 and 10 mm slots (also on a closed frame), the Variofix block in the 10 mm slot, or the mounting rim profile in the 8 mm slot while you assemble the frame.

Tell us the dimensions of the opening to close or the panel list: we will confirm the available size and machining.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.