Skip to Content
  1. All Products
  2. Lean Logistic
  3. Containers, Pallets and Lids
  4. Material compartment profile ESD

Material compartment profile ESD

https://leanproducts.eu/web/image/product.template/3676/image_1920?unique=1d9bc53

The Bosch Rexroth Material Compartment Profile ESD is an anodized aluminium profile with ESD properties, available in 90x45, 90x90 and 180x90 mm cross-sections and a maximum length of 1500 mm. With a linear weight of 1.8 kg/m and a cross-sectional area of 7.0 cm², it delivers moments of inertia Ix/Iy of 20.7/54.3 cm⁴, providing the structural stiffness required for lean logistics applications in electrostatic-sensitive environments. Its ESD compliance makes it suitable for integration into workstations and storage systems where protection of electronic components is a process requirement.

Read more ↓
Code: 3842993446
Length: 1,500
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Brand
  • Max length mm
  • Cross-section area cm²
  • Moment of inertia Ix / Iy cm⁴
  • Weight
  • Section
  • Length
  • Material

Cut dimensions

mm
81,5 × 38,5 mm Real profile section
0Full bar 1500 mm
Calculating price…
Full bar Full sheet of the sheet From {min} to {max} mm · full bar {max} mm Up to {maxl} × {maxw} mm · minimum {min} mm Length between {min} and {max} mm. Width between {min} and {max} mm.

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Max length mm 1500
Section 90x45
Cross-section area cm² 7.0
Moment of inertia Ix / Iy cm⁴ 20.7 / 54.3
Weight 1.8 kg/m
Length 1500
Material Anodized aluminium

Same size and same section data: the standard one is anodised and goes up to 3000 mm, the ESD version has AluTin coating and goes up to 1500 mm.

The grip tab with filling spout 90x45 ESD, supplied with fixing hardware, and the base for the ESD picking container. For easier filling, add the funnel 90x45 ESD.

When the container works in an EPA area or holds components sensitive to electrostatic discharge. Pair it with the ESD compartment profile, which has a conductive AluTin coating and is cut up to 1500 mm.

Il 90x45 è il vano più basso, il 90x90 ha la stessa larghezza ma è alto il doppio e contiene di più, il 180x90 è largo il doppio. Pesano 1,8, 2,5 e 4,2 kg/m. Scegli in base alla quantità e all’ingombro dei pezzi.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.