Docking Station Serie E per ET1 - Ricarica e Scambio Acqua Automatici

Docking station E series for ET1 - automatic charging and water exchange

Name: Docking station E series for ET1 - automatic charging and water exchange
Brand: LeanProducts
SKU: P-DS-ET1

The docking station for ET1 makes the PUDU compact scrubber-dryer robot autonomous between one job and the next: charging, water filling and draining, metered detergent and automatic roller cleaning.

Recommended above 800 m² per cycle. 220–240 V version: requires a water supply, floor drain and power.

ET1 docking station: automatic charging, water and roller cleaning

The optional station for the compact scrubber-dryer robot ET1, 220–240 V version: the robot returns on its own, charges, drains the dirty water, fills clean water with metered detergent and washes the roller. Above 800 m² per cycle it is the solution for not having to fill and empty the tanks by hand.

For ET1220–240 V versionAutomatic charging and waterMetered detergentRoller self-cleaning

ET1 docking station: automatic charging, water and roller cleaning

Why choose it

Water without an operator

It fills clean water and drains dirty water: above 800 m² per cycle it is the recommended choice.

Metered detergent

It meters the detergent into the clean water from 1:20 to 1:300; 1.3 L tank, non-foaming detergents only.

Pre-heated water

For hot-water washing the station pre-heats the water: the robot uses less battery to heat it.

Clean roller

It washes the roller in quick (2 minutes) or deep (5 minutes) mode; depending on the tray, it also cleans the squeegee.

Data and compatibility

Item	Value
Compatible with	ET1
Power supply	220–240 V AC version; 29.2 V DC output
Functions	Charging, clean water filling, dirty water draining, detergent metering, water pre-heating, roller self-cleaning (and squeegee, depending on the tray)
Dimensions	406 × 203 × 430 mm
Weight	15,4 kg
Detergent	1.3 L tank; non-foaming only, pH between 2 and 12; dilution from 1:20 to 1:300
Connections	Water supply (0.1–1 MPa), floor drain (outlet at most 0.5 m high), power
Installation	Floor or wall mounted; flat, anti-slip floor, slope under 2°
Clearance	1.3 × 0.9 m on the floor, 1.4 m high
Environment	0–40 °C, humidity up to 90%
Connection to the robot	Bluetooth

Without a water connection the station can be paired with an optional mobile tank: we assess it with you during the site survey.

Compatible with

ET1 AI-native compact scrubber-dryer robotCompatible robot

Any other questions?Read the 4 frequently asked questions →

Want to know which accessory your PUDU robot needs?

Tell us the model, the serial number and what your environment is like: we will confirm the right code and, if needed, check everything on a site visit.

Request a quote Call +39 0434 572757

Specifications

The ET1 also works without it, but filling and emptying the tanks remains manual work. Above 800 m² per cycle the station is worthwhile: it fills and drains the water by itself and the robot works continuously.

A water supply with pressure between 0.1 and 1 MPa, a floor drain and 220–240 V power. If there is no water connection, the optional mobile tank is available. We check the position and connections with you during the site survey.

The ET1 also heats the water by itself, but it uses battery. With the station the water arrives already preheated in the tank: the robot uses less power and works longer.

Only non-foaming detergents, with a pH between 2 and 12. The station doses them by itself into the clean water, from 1:20 to 1:300.

Lean plant

PUDU robots