LongLife Low Duty Roll is an adhesive PVC tape for floor marking, designed to delimit hazardous areas and signal unsafe zones in low-traffic environments. Suited for temporary applications on low-impact surfaces, it is available in nine standard colours — including the two-tone Yellow/Black and White/Red combinations — to meet industrial safety colour conventions. The 50 mm width is supplied in packs of 3 × 33 m rolls; the 75 mm width in packs of 2 × 33 m rolls.

LongLife Heavy Duty Symbols are rigid plastic floor marking shapes designed for area delimitation in high-traffic environments such as warehouses, driveways, and parking lots where standard floor markings are not sufficient. Forklift-resistant and with excellent adhesion, they maintain visibility and position under heavy operational loads. Available in T-shape, L-shape, and longitudinal formats across 8 standard colors, they support flexible visual management layouts. Pack of 20 pieces.

LongLife Standard - Symbols are adhesive elements for floor marking designed for precise delimitation of workstations, aisles and operational areas in industrial environments. Available in 9 colors, 3 widths (50, 75 and 100 mm) and 4 geometric shapes (T-Shape, L-Shape, Longitudinal Marking, Squared Shape), they allow configuration of standardized visual layouts according to visual management principles. Each pack contains 50 pieces, ensuring adequate supply for interventions on production lines or logistics areas.

LongLife Standard adhesive PVC angles are floor marking elements available in 45° and 90° geometries, designed to define lanes, workstations and operational areas in industrial environments. The material withstands mechanical stress and machine washing, ensuring long-term durability. Available in 9 colours, 3 widths (50, 75 and 100 mm) and packs of 50 pieces, they are compatible with the most common visual management standards.

The Hard Scrubbing Roller Brush Red 2pcs (code P-C-C9) is a replacement consumable for Pudu CC1-series scrubber-dryer robots, supplied in a 2-piece pack. The hard bristle configuration delivers intensive scrubbing action on hard floor surfaces, supporting consistent cleaning performance across regular maintenance cycles. The roller design is engineered to mount on plates with a maximum thickness of 2 mm.

The Tubo (P-C-C23) is a consumable component designed for LeanRobot CC1 line systems. It ensures operational continuity of the suction circuit and is integrated into the standard machine maintenance cycle.

The Flow Meter of the Docking Station (P-C-C24) is a consumable spare part designed for the CC1 cleaning robot's docking station. It ensures accurate flow monitoring during the automatic water refill and discharge cycles, supporting the reliable operation of the self-cleaning system. Regular replacement of this component preserves the station's operational efficiency and the accuracy of its water change alerts.

The Adapter for Central Brush MT1 (code P-C-M6) is a dedicated replacement component for the MT1 service robot, designed to ensure correct mounting and operation of the central brush during cleaning cycles. As a category-specific consumable for the MT1 platform, it supports consistent brushing performance and facilitates routine maintenance interventions. Designed for use within the LeanRobot MT1 consumables line.

The MT1VAC Sealing Rubber - 6 Pairs (cod. P-C-M7) is a consumable spare parts kit designed for the MT1VAC robot in the LeanRobot line, supplied in a 6-pair pack. The sealing rubbers are intended for periodic replacement of components subject to wear during the robot's operating cycle. Using original spare parts ensures consistent system performance and operational continuity with minimal downtime.

The Dust mopping cloth MT1VAC - 6 pcs is the dedicated consumable for the dust mop mode of the Pudu MT1 VAC robot. The quick-release design enables tool-free replacement in seconds, reducing downtime during cleaning operations. The 6-piece pack ensures an adequate supply for facilities running continuous 24/7 cleaning cycles.

Pack of 2 replacement High Efficiency H11 air filters for the MT1 VAC service robot, providing a filtration efficiency of 95% for particles ≥ 0.3 microns. Designed to maintain consistent vacuuming performance during 24/7 continuous operation, these filters integrate with the MT1 VAC's modular quick-release system for tool-free replacement and minimal downtime.

The Frame With 2 Trays For T300 - 620x500 mm (P-A-T4) is a dedicated accessory for the PUDU T300 autonomous mobile robot, engineered for double-layer transport configurations with a 620×500 mm load surface per tray. It supports a maximum load of 100 kg per layer, with a total capacity of up to 300 kg including the tray. Layer height is adjustable in 50 mm increments, allowing flexible integration into diverse industrial material flow applications.

The IOT Control Module (code P-A-T5) is a LeanRobot accessory designed to extend the integration capabilities of the service robot system, enabling elevator control via the dedicated Elevator Control Module and access point management via the E-gate Control Module. Connectivity with the PUDU Link app allows remote monitoring and operational supervision. The module ships with the connection cable for the control unit included, facilitating integration into existing infrastructure.

The Adapter Kit 2.4G Lora CC1PRO is a dedicated accessory for the CC1PRO service robot, designed to enable wireless communication via the 2.4G Lora protocol. The kit allows integration of the radio frequency communication system into the robot, supporting advanced functionalities such as autonomous management of vertical logistics flows through compatible elevators. A modular solution aimed at expanding the operational capabilities of the CC1PRO in industrial and service environments.

The Lateral Brush Rubber CC1 (cod. P-C-C25) is a consumable spare part for LeanRobot CC1 series robots, supplied in a 2-piece kit. It is designed for quick replacement of lateral brushes subject to wear during the robot's operating cycle. Its use ensures continuous system performance with minimal downtime.

The Manual Water Adapter (P-A-C5) is a LeanRobot accessory designed to enable manual water supply and discharge management for the mobile cleaning station. It provides a manual alternative to the integrated auto water refill and discharge system, supporting the robot's clean and waste water tanks of 15 L each. Suitable for operational environments where automated water infrastructure is not available or required.

The Red Rubber for Brush CC1 (cod. P-C-C26) is a consumable spare part in the LeanRobot line, supplied in a 2-piece kit. Designed for quick replacement of wear-prone components during the CC1 robot's operating cycle, it ensures continuous system performance with minimal machine downtime.

The Self Adhesive Rubber for Glass CC1 (P-A-C6) is a dedicated accessory for the CC1 Multifunctional Cleaning Robot, designed to ensure secure and stable adhesion on glass surfaces during service operations. As a purpose-built replacement component for the CC1 series, it supports correct system performance in environments featuring glass surfaces. This original accessory is recommended to maintain the robot's operational performance at design specifications.

The Warning Light CC1 (cod. P-A-C7) is an optional accessory designed for the CC1 robot, integrating a flashing light system combined with a buzzer/audio module. The device activates automatically when the robot is in motion, delivering full 360° sound and light interaction to alert personnel in the working area and reduce collision risk. Power is supplied directly through the CC1's peripheral expansion port, requiring no additional dedicated wiring.