Skip to Content
  1. All Products
  2. AL Modular System
  3. Doors and fittings
  4. Hinges
  5. Plastic hinge

Plastic hinge

https://leanproducts.eu/web/image/product.template/3596/image_1920?unique=1d9bc53

Signal grey polyamide hinge with zinc-plated steel pin for doors and hatches on profiles with slot C8 and C10: anti-rotation centring pin, screws included, also for frame and door of different sections. Fmax 150 N.

Read more ↓
Code: 3842554458
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Colour
  • Load capacity Fmax N
  • Tightening torque Nm
  • Technical notes
  • Material
  • Dimensions mm
  • Slot mm
  • Profiles P1/P2
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Colour signal grey
Load capacity Fmax N 150
Tightening torque Nm 5
Material Poliammide (PA)
Dimensions mm 30x30
Technical notes Plastic hinge with centring pin; incl. screws DIN 7991
Profiles P1/P2 30/30
Slot mm 8/10
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

They are the sections of the two profiles the hinge joins, P1 and P2: 30/45 joins a 30 profile to a 45 one, for example a 30 series frame and a 45 series door. With frame and door of the same series, take 30/30 or 45/45; 40-50/40-50 fits 40 and 50 mm profiles.

The plastic hinge has two wings and joins two profiles. The double hinge has three wings, P1, P2 and P3, and connects three 45 mm profiles. Material, 150 N load capacity and 5 Nm torque are the same.

At least two. Each plastic hinge holds up to 150 N: for tall or heavy doors, add a third. Send us the dimensions and material of the panel and we will check.

The plastic hinge has two wings and connects two profiles; the double one has three and connects three profiles. Material, 150 N load capacity and 5 Nm torque are the same.

It is the stainless steel hinge for 20 series profiles with slot C6: it holds 300 N, is tightened to 2.5 N·m and comes with M4x6 screws. Suitable for small doors and hatches.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.