Skip to Content
  1. All Products
  2. AL Modular System
  3. Mounting of surface elements
  4. PVC glazing profile (C8/C10)

PVC glazing profile (C8/C10)

https://leanproducts.eu/web/image/product.template/2932/image_1920?unique=1d9bc53

Grey RAL 7004 PVC profile for fixing panels and sheets from 1.5 to 8 mm in slot C8 or C10, even in frames that are already closed: base profile plus clip-in strip, with sealing lips against water splashes. 2000 mm bars.

Read more ↓
Code: 3842555284
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Slot mm
  • Colour
  • Length mm
  • Technical notes
  • Component
  • Material
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Colour signal grey RAL 7004
Technical notes Profilato di base A; per elementi di spessore 1,5-8 mm
Length mm 2000
Component base profile
Slot mm 8/10
Material PVC
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

Yes: the base profile goes into the frame slot and the clip-in strip locks the panel. For each side of the panel you need the base and the strip.

Yes, it is designed precisely for retrofitting in closed frame constructions: you do not need to dismantle the profiles to insert or change the panel.

Panels and sheets 1.5 to 8 mm thick. The panel stays centred in the slot.

This version has the base profile in anodized aluminium and is suitable for the clean room. If you do not need that, there is the PVC version.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.