Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Brackets
  5. Sheet metal angle

Sheet metal angle

https://leanproducts.eu/web/image/product.template/3563/image_1920?unique=1d9bc53

Zinc-plated sheet steel angle for joining profiles with slot C10 at right angles, without machining. 60x60x42 version for frames and 103x103x37 version with D12.5 hole for M12 levelling feet and castors.

Read more ↓
Code: 3842146813
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Slot mm
  • ESD
  • Size
  • Technical notes
  • Material
  • Dimensions mm
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

ESD yes
Size 42x60
Material Zinc-plated sheet steel
Dimensions mm 103x103x37
Technical notes Sheet metal angle
Slot mm 10
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

M8x20 T-bolts for slot C10 and M8 flange nuts, to be ordered separately. The 103x103x37 version already includes the fastening material.

Fix the angle in the slots of the two profiles in the corner of the frame and mount the levelling foot or the M12-threaded castor in the D12.5 hole. This way the foot stays offset towards the inside of the structure.

With accessories that have a through hole: sheet metal angles, brackets, base plates, mounting brackets. The screw goes into the slot, the part slides onto the thread and is closed with the flange nut.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.