Single boom Ø 35

Tube boom with end plug, custom-built in the length you need: it slides into the reel hole to lift it with the Work Positioner. Capacity 80 kg from WP 85 to WP 205, 60 kg on the WP 65, 50 kg on the WP 55.

Work Positioner boom Ø 35 mm for reels

Slim boom with an end plug for reels with a small hole. In painted steel or stainless steel, up to 80 kg. A reel mandrel (boom) for work positioners.

Ø 35 mm tubeEnd plugSteel or stainless steel

80 kgcapacity from WP 85 to WP 205

Why choose it

Small hole

For reels and loads with a narrow hole.

Steel or stainless steel

In painted steel or stainless steel.

From WP 55 to WP 205

50 kg on the WP 55, 80 kg from WP 85 to WP 205.

Technical data

Version	Steel, stainless steel
Width mm	35

The usable capacity depends on the Work Positioner the tool is fitted to: you will find it below for each model.

Compatible with

WP 55Usable capacity 50 kg

WP 65Usable capacity 60 kg

WP 85Usable capacity 80 kg

WP 125Usable capacity 80 kg

WP 205Usable capacity 80 kg

Any other questions?Read the 5 frequently asked questions →

We help you choose the right tool

Send us the weight, shape and dimensions of the load and tell us which Work Positioner you use: we will check the tool and the capacity.

Request a quote Call +39 0434 572757

Specifications

Version	Steel
Length mm	300-800
Width mm	35

For reels and loads with a narrow hole: the tube is Ø 35 mm, with an end plug. It is a custom-made tool: send us the dimensions and a drawing of the load and we will check the capacity on your Work Positioner.

Rated load capacity with this tool: 50 kg on the WP 55, 60 kg on the WP 65, 80 kg on the WP 85, 80 kg on the WP 125 and 80 kg on the WP 205. For stainless steel Work Positioners there is the stainless steel version, code WPR-T-9005-SS.

Yes, with the quick change for manual tools: the trolley part stays on the Work Positioner (WPR-A-0001-SS up to the WP 125, WPR-A-0003-SS for WP 125 and WP 205) and the tool part is fitted to this tool. You can then change it in a few seconds, on your own, without unscrewing it; without the quick change it is fixed to the carriage with screws.

With a work positioner and the right tool: the mandrel goes into the core of the reel, the gripper clamps it from the outside, and there is also an electric gripper that turns it through 90°. For drums there is the manual front tilting gripper, which lifts and tilts them with a handwheel.

From four things: part weight, how you pick it up (which tool you need), stroke and working environment. The capacity applies with the centre of gravity 400 mm from the mast, tool included; the work positioner selection guide, with its 4-question selector, shows you the suitable models and tools.

Lean plant

PUDU robots