Single boom Ø 60

The Single boom Ø 60 is a cantilever tube with a diameter of 60 mm, available in steel or stainless steel, in a length of 500 mm. Weighing 3 kg, it is compatible with the WP 55, WP 65, WP 85, WP 125 and WP 205 Work Positioners, with a load capacity of up to 120 kg depending on the model it is paired with. The stainless steel version also makes it suitable for environments with high hygiene requirements.

Work Positioner boom Ø 60 mm for reels, 120 kg

Cantilever boom with an end plug: it slides into the hole of the reel to lift and move it. 500 mm long, in painted steel or stainless steel, up to 120 kg on WP 125 and WP 205. A reel mandrel (boom) for work positioners.

Ø 60 mm tubeEnd plugLength 500 mm

120 kgcapacity on WP 125 and WP 205

3 kgboom weight

Why choose it

For reels

It slides into the hole and picks up the reel.

Steel or stainless steel

In painted steel or stainless steel.

From WP 55 to WP 205

50 kg on the WP 55, 120 kg on WP 125 and WP 205.

Technical data

Specification	Value
Version	Steel, stainless steel
Length (mm)	500
Width mm	60

The usable capacity depends on the Work Positioner the tool is fitted to: you will find it below for each model.

Compatible with

WP 55Usable capacity 50 kg

WP 65Usable capacity 60 kg

WP 85Usable capacity 80 kg

WP 125Rated load capacity 120 kg

WP 205Rated load capacity 120 kg

Any other questions?Read the 5 frequently asked questions →

We help you choose the right tool

Send us the weight, shape and dimensions of the load and tell us which Work Positioner you use: we will check the tool and the capacity.

Request a quote Call +39 0434 572757

Specifications

Version	Steel
Dimension	Standard
Length mm	500
Width mm	60

It slides into the hole of the reel to lift and move it: a cantilever tube Ø 60 mm and 500 mm long, with an end plug. For smaller holes there is the Ø 35 mm mandrel WPR-T-9005.

Rated load capacity with this tool: 50 kg on the WP 55, 60 kg on the WP 65, 80 kg on the WP 85, 120 kg on the WP 125 and 120 kg on the WP 205. For stainless steel Work Positioners there is the stainless steel version, code WPR-T-0004-SS.

Yes, with the quick change for manual tools: the trolley part stays on the Work Positioner (WPR-A-0001-SS up to the WP 125, WPR-A-0003-SS for WP 125 and WP 205) and the tool part is fitted to this tool. You can then change it in a few seconds, on your own, without unscrewing it; without the quick change it is fixed to the carriage with screws.

With a work positioner and the right tool: the mandrel goes into the core of the reel, the gripper clamps it from the outside, and there is also an electric gripper that turns it through 90°. For drums there is the manual front tilting gripper, which lifts and tilts them with a handwheel.

From four things: part weight, how you pick it up (which tool you need), stroke and working environment. The capacity applies with the centre of gravity 400 mm from the mast, tool included; the work positioner selection guide, with its 4-question selector, shows you the suitable models and tools.

Lean plant

PUDU robots