Skip to Content
  1. All Products
  2. AL Modular System
  3. Joints
  4. Swivel fastening 180°

Swivel fastening 180°

https://leanproducts.eu/web/image/product.template/3582/image_1920?unique=1d9bc53

Swivel mount for holders, trays and accessories that must tilt ±90° on strut profiles with slot C8 and C10: lock it with the lever in the position you need. Maximum moment 40 Nm, ESD version.

Read more ↓
Code: 3842538276
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Moment Mmax Nm
  • Technical notes
  • ESD
  • Slot mm
  • Slot P1/P2
  • Material
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S5
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Moment Mmax Nm 40
ESD yes
Technical notes Swivel fastening 180°, tiltable ±90°; black die-cast zinc lever
Slot mm 8/10
Slot P1/P2 C8 / C8-C10
Material Zinc-plated steel
Brand Bosch Rexroth
Tags
Tags
Bosch 5S5

The limit is the moment: 40 Nm. A 10 kg holder (about 100 N) with its centre of gravity 300 mm from the pivot gives 30 Nm and is within the limit. If the load is heavier or further away send us the dimensions: we will check the solution together.

This version has one side for slot C8 and the other for slot C8 or C10. The version with the first side for slot C10 has a different code: ask us for it if you need it.

No: the swivel joint comes with the fastening material for the profiles, the clamping lever is ordered separately. The 180° swivel mount, on the other hand, already includes it.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.