V-support

The V-support is a support element for work positioners designed for centring and stably positioning cylindrical or shaped parts during machining operations. Available in steel or stainless steel, with a width of 300 mm and a length of 350 mm.

V-support for Work Positioner boom with wheel

V-support to fit on the WPR-T-0002 boom with wheel: it holds reels and cylindrical loads. In painted steel or stainless steel, up to 80 kg. An accessory for the work positioner boom (reel mandrel).

V-supportFor boom with wheel350 × 300 mm

V-support for Work Positioner boom with wheel

80 kgcapacity from WP 85 to WP 205

3 kgV-support weight

Why choose it

Cylindrical loads

The V shape holds reels and rolls.

On the boom with wheel

It fits on the WPR-T-0002 boom.

From WP 55 to WP 205

50 kg on the WP 55, 80 kg from WP 85 to WP 205.

Technical data

Specification	Value
Version	Steel, stainless steel
Length (mm)	350
Width mm	300

The usable capacity depends on the Work Positioner the tool is fitted to: you will find it below for each model.

Compatible with

WP 55Usable capacity 50 kg

WP 65Usable capacity 60 kg

WP 85Usable capacity 80 kg

WP 125Usable capacity 80 kg

WP 205Usable capacity 80 kg

Single boom with wheel and V-support mountBoom it fits on

Any other questions?Read the 5 frequently asked questions →

We help you choose the right tool

Send us the weight, shape and dimensions of the load and tell us which Work Positioner you use: we will check the tool and the capacity.

Request a quote Call +39 0434 572757

Specifications

Version	Steel
Dimension	Standard
Length mm	350
Width mm	300

On the WPR-T-0002 mandrel with wheel. The V shape holds reels and rolls; the support measures 350 × 300 mm and weighs 3 kg.

Rated load capacity with this tool: 50 kg on the WP 55, 60 kg on the WP 65, 80 kg on the WP 85, 80 kg on the WP 125 and 80 kg on the WP 205. For stainless steel Work Positioners there is the stainless steel version, code WPR-T-0003-SS.

Yes, with the quick change for manual tools: the trolley part stays on the Work Positioner (WPR-A-0001-SS up to the WP 125, WPR-A-0003-SS for WP 125 and WP 205) and the tool part is fitted to this tool. You can then change it in a few seconds, on your own, without unscrewing it; without the quick change it is fixed to the carriage with screws.

With a work positioner and the right tool: the mandrel goes into the core of the reel, the gripper clamps it from the outside, and there is also an electric gripper that turns it through 90°. For drums there is the manual front tilting gripper, which lifts and tilts them with a handwheel.

From four things: part weight, how you pick it up (which tool you need), stroke and working environment. The capacity applies with the centre of gravity 400 mm from the mast, tool included; the work positioner selection guide, with its 4-question selector, shows you the suitable models and tools.

Lean plant

PUDU robots