Skip to Content
  1. All Products
  2. AL Modular System
  3. Cover caps and cover profiles
  4. Ball bearing carriage C8

Ball bearing carriage C8

https://leanproducts.eu/web/image/product.template/2862/image_1920?unique=1d9bc53

Carriage with dust-protected ball bearings for the guide profile 30x45C: it runs smoothly and carries profiles with slot C8, for sliding doors or movable suspended parts. Load capacity 150 N, M5x30 screws included.

Read more ↓
Code: 3842524153
  • Brand
  • Slot mm
  • Colour
  • Load capacity Fmax N
  • Technical notes
  • Material
  • Slot mm

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Technical notes Carriage with dust-protected ball bearings; incl. 2xFS2 (ISO 4762 M5x30)
Colour black
Load capacity Fmax N 150
Slot mm 8
Material Black PA / zinc-plated steel
Slot mm 8
Tags
Tags
Bosch 5S1

The carriage with eyelet is for hanging, for example with a snap hook, and carries 200 N. This one has ball bearings for smooth running and fixes to a profile with slot C8, with a load capacity of 150 N.

With the 30x45C end piece, which closes the end of the guide and acts as a stop. On sliding doors, the stop set gives cushioned closing.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products