Sliding door profile Al 45

Between two vertical uprights of the structure, fixed with inner brackets for slot C10. We cut it to the distance between the uprights.

5 or 6 mm panel elements, for example 5 mm polystyrene panels. For 8 mm panels choose the Al 45 system.

8 mm panel elements, which you can also insert into a frame that is already closed. For 5 or 6 mm panels there is the Al Clip system.

The PVC profile clips into the slot of the frame you already have. The Al 45 profile is an aluminium profile that becomes a load-bearing element of the structure and is mounted between two posts with the inner bracket brackets. Both are for 8 mm panels.

Besides this profile: the PVC sliding profile for the top edging, the reinforcement profile as running surface, cover cap, end piece and inner brackets. Send us the opening dimensions and we'll prepare the bill of materials with the cuts.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.