Skip to Content
  1. All Products
  2. AL Modular System
  3. Strut profiles
  4. Slot C8 (8 mm)
  5. Suspension profile 15x30 ESD

Suspension profile 15x30 ESD

https://leanproducts.eu/web/image/product.template/3673/image_1920?unique=1d9bc53

Suspension profile 15x30 in natural aluminium, ESD version: for hanging picking containers, grip tabs and tool holders on workstations in EPA areas. 0.6 kg/m, 3000 mm bar or cut to length.

Read more ↓
Code: 3842993063
Length: 3,000
  • Brand
  • Slot mm
  • Max length mm
  • Cross-section area cm²
  • Moment of inertia Ix / Iy cm⁴
  • Section modulus Wx / Wy cm³
  • Length
  • Weight
  • Material

Cut dimensions

mm
15 × 30 mm Real profile section
0Full bar 3000 mm
Calculating price…
Full bar Full sheet of the sheet From {min} to {max} mm · full bar {max} mm Up to {maxl} × {maxw} mm · minimum {min} mm Length between {min} and {max} mm. Width between {min} and {max} mm.

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Slot mm 8
Cross-section area cm² 2.0
Moment of inertia Ix / Iy cm⁴ 2.0 / 0.5
Section modulus Wx / Wy cm³ 2.7 / 0.3
Max length mm 3000
Length 3000
Weight 0.6 kg/m
Material Anodized aluminium

Section and use are the same; the finish differs: the ESD version is natural aluminium, the standard one is anodised. Choose ESD if the workstation is in an EPA area.

With M8x12 ISO 7380 button head screws and T-nuts in the slot of the frame profile, through the holes in the suspension profile. Screws and nuts are not included.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products