Skip to Content
  1. All Products
  2. AL Modular System
  3. Mounting of surface elements
  4. Bottom profile L=10000 mm grey

Bottom profile L=10000 mm grey

https://leanproducts.eu/web/image/product.template/2893/image_1920?unique=1d9bc53

Grey thermoplastic elastomer mounting rim profile that holds 2 to 6 mm panels in the slot of C6 and C8 profiles. Fitted together with the frame; 10 m long, to be cut to the length of each side.

Read more ↓
Code: 3842523493
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Brand
  • Production method
  • Colour
  • Slot
  • Material

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Brand Bosch Rexroth
Slot C6
Production method Extrusion
Colour Grey
Material Thermoplastic elastomer (TPE)

Start from the clear opening between profiles (L1) and add the part that goes into the slots: with 6 mm slot the panel measures L1 + 8.5 mm, with 8 mm slot L1 + 16 mm. Send us the frame dimensions and we will confirm the panels and metres of profile.

No: the panel with the insert profile must be fitted while you assemble the frame. To add panels to a closed structure use the glazing profile for 8 and 10 mm slots or the Variofix C10 block.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products