Skip to Content
  1. All Products
  2. AL Modular System
  3. Cover caps and cover profiles
  4. Cover caps for brackets and connectors
  5. Cover cap for bracket

Cover cap for bracket

https://leanproducts.eu/web/image/product.template/2908/image_1920?unique=1d9bc53

PP cover cover cap for brackets, from 20x20 to 100x100: closes the bracket, keeps it from collecting dirt and finishes the joint. In signal grey RAL 7004 and, for several sections, in black ESD.

Read more ↓
Code: 3842548846
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Section
  • Production method
  • Technical notes
  • Dimensions mm
  • ESD
  • Material
  • Colour
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

ESD yes
Dimensions mm 20x20
Production method Die casting
Technical notes Cappellotto di copertura per squadretta angolare
Section 20x20
Material PP
Colour grey
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

Take the same section as the bracket you fitted: a 45x45 bracket needs the 45x45 cover cap, a 40x80 the 40x80 cover cap.

When the structure is in an ESD protected area and the plastic parts must also be conductive. On this product page the black ESD is available for 30x30, 40x80, 45x45, 45x90, 45x180, 80x80 and 90x90; for other sections ask us.

This one closes the end of the cut profile. The cover cap for bracket instead covers the bracket fitted at the joint between two profiles. On a visible frame you usually need both.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products