Skip to Content
  1. All Products
  2. AL Modular System
  3. Cover caps and cover profiles
  4. Cover caps for strut profiles
  5. Cover cap for profile

Cover cap for profile

https://leanproducts.eu/web/image/product.template/3609/image_1920?unique=1d9bc53

Polypropylene closing cover cap for the end of slotted aluminium profiles: it covers the cut, removes sharp edges and keeps the chambers clean. 37 sections, from 10x40 to 100x100, including R, HR and angle profiles, in signal grey or black ESD.

Read more ↓
Code: 3842548752
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Section
  • Production method
  • Technical notes
  • Dimensions mm
  • ESD
  • Material
  • Type
  • Colour
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

ESD yes
Dimensions mm 20x20
Production method Die casting
Technical notes Cover cap with hole
Section 20x20
Material Polypropylene (PP)
Type closed
Colour signal grey
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

The die-cast zinc cover cap resists impacts and aggressive agents: choose it for exposed profile ends. In other cases the plastic cover cap for profile is fine, grey or black ESD, available for many more sections.

Choose the size matching the profile section: 45x45 fits 45x45 and 45x45L, 40x40 fits 40x40L, 30x30 fits 30x30. Rounded R and HR profiles and angle profiles (30°, 45°, 60°) have a dedicated cover cap. If you are not sure, tell us the profile code and we will confirm the cover cap.

For many tall sections there is a full cover cap of the same size, for example 30x60, 45x90 or 60x90. Others are closed with several cover caps of the basic section side by side: two 30x30 on the 30x60 as an alternative to the full cover cap, three 45x90 on the 45x270, two 90x90L on the 90x180L.

In die-cast zinc the sections are 30x30, 40x40 and 45x45. For the others use the plastic cover cap for profile.

They follow the shape of rounded profiles: R for profiles with rounded corners (20x20 R, 40x40 R, 45x45 R), HR for 40x40 HR and 45x45 HR profiles. On a rounded profile a square cover cap would protrude at the corners.

Not with this closed cover cap: it also covers the central bore. You need the cover cap with hole, a different version, through which the stem of the foot or castor passes. Ask us for the code for your section.

When the frame is in an EPA and all visible components must be in ESD version, for example on electronics workbenches. The black ESD version exists for 11 sections: in the variant selector you will find the colours available for yours.

This one closes the end of the cut profile. The cover cap for bracket instead covers the bracket fitted at the joint between two profiles. On a visible frame you usually need both.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products