Dolly Taxi
Dolly Taxi is the shelf trolley of the tugger train: base deck and two adjustable shelves in 50 mm steps for mixed loads of KLT containers, cartons and parts. Push it by hand or hitch it into the train with the retractable drawbar.
Sizes 1200×800 or 932×600 mm, capacity 500 kg, 200 kg per shelf, Ø 160 mm polyurethane castors with brake, ready for load straps and cover.
Documents
Lean Logistic · Pallet dollies and shelf trolleys
Dolly Taxi: shelf trolley for KLT containers, cartons and parts in the milk run
The shelf trolley of the tugger train: base deck and two shelves adjustable in 50 mm steps, for mixed loads of KLT containers, cartons and parts. It carries 500 kg, 200 kg per shelf, on 160 mm polyurethane castors with brake, and hitches into the train with the retractable drawbar.
Why choose it
Mixed transport
KLT containers, cartons and parts on the same trolley, on three levels: a single trip for several items.
Adjustable shelves
You move the shelves in 50 mm steps and adapt the trolley to the height of your containers. If needed, add a shelf.
In the tugger train
Retractable 3-position drawbar with quick hitch: it runs in the train with Dolly Pallets and the other towable K.Hartwall trolleys.
Protected load
Ready for load-securing straps and the protective cover, even for transfers between buildings.
Choose it if…
- You carry mixed loads: KLT containers, cartons, loose parts.
- You want to use the trolley's height with several levels.
- You supply several workstations in the same milk run round.
- You want to protect the load with a cover and straps.
Choose another solution if…
- You work with the LiftLiner: LL Taxi trolley →
- You carry whole pallets up to 1000 kg: Dolly Pallet →
- You carry 600x400 dollies to be picked from both sides without unhitching: Taxi Liner with 3 bays for 600x400 dollies →
- You carry single stacks of containers in the train: Dolly Type VII B →
Not sure which one to choose? Use the selection guide →
Where it works
The Dolly Taxi is the department's “taxi”: it goes from the supermarket to the workstations and delivers several items in a single round.
- Line replenishment: several part numbers per trip, each on its own shelf, with a milk run at fixed times
- Kitting: kits and parts prepared in the warehouse and delivered to the workstation
- Transfers between departments or buildings: with protective cover and load-securing straps
- KLT containers: four 600x400 stacks fit on a 1200x800 shelf
Fewer trips and less manual handling: one trolley instead of several separate transports.
How it is built
Adjustable shelves
Two shelves that can be repositioned in 50 mm steps above the base deck.
Retractable drawbar
On the short side, 3 positions, with quick hitch for the train.
Protective cover
Ready for cover and load-securing straps: load protected from dust and impacts.
Two sizes
1200x800 mm (LP-KT001) and 932x600 mm (LP-KT021), both with 3 levels.
160 mm polyurethane castors, 2 fixed and 2 swivel with brake, with impact protection.
In the tugger train
The Dolly Taxi hitches up with the other towable K.Hartwall trolleys:
Retractable drawbar
3 positions, with quick hitch: you open it for the train and close it when you push by hand.
Up to 6 trolleys
Up to 6 trolleys in a line, at the maximum recommended speed of 6 km/h.
We check the route, curves and number of trolleys with you.
The LeanProducts service
From the flow map to delivery, with a single point of contact:
Flow and layout analysis
We look at routes, containers, frequencies and delivery points with you and tell you which trolleys you need and how many.
Configuration
Together we choose sizes, castors, drawbar and accessories according to loads, floors and the tow vehicles you already have.
Delivery and start-up
We deliver and help you start the new round: loading, hitching, routes and return of empties.
Spare parts and service
Spare castors, drawbars and accessories: we confirm the right part number even for the dollies you already have.
LeanProducts is the K.Hartwall distributor in Italy.
Technical data
| Specification | Value |
|---|---|
| Sizes | 1200 × 800 mm (LP-KT001); 932 × 600 mm (LP-KT021) |
| Footprint (1200 × 800) | 1280 × 809 × 1680 mm |
| Load capacity | 500 kg |
| Load capacity per shelf | 200 kg; 125 kg if the shelf is at a height of 1200 mm |
| Levels | 3: base deck + 2 repositionable shelves |
| Shelf adjustment | 50 mm pitch |
| Deck | Anti-slip plywood |
| Castors | Ø 160 mm polyurethane, with impact protection: 2 fixed and 2 swivel with brake |
| Drawbar | Retractable, 3 positions, quick-hitch |
| In the tugger train | Up to 6 trolleys, 6 km/h |
| Structure | Steel with blue zinc plating EN-ISO 2081 |
| Weight | 113 kg (1200 × 800) |
| Provisions | Load-securing straps and protective cover |
Additional shelves, short-side handle, 6-castor upgrade and fork guides are available as accessories.
Accessories and related products
Additional shelf for Dolly TaxiOne more shelf, 200 kg
Short-side handleHandle on the short side
6-castor upgrade (2 swivel)Rotation on the spot through 360°
Fork guide setGuides for the forklift forks
Milkrun Drawbar assemblyDrawbar for the milk run tow vehicle
LL Taxi trolleyShelf trolley for the LiftLiner
Dolly PalletPallet trolley for the same train
Taxi Liner with 3 bays for 600x400 dolliesTrailer for 600x400 dolliesWant to find out which pallet trolley is right for you?
Tell us about loads, routes and tow vehicles: we will propose the right trolley and how to build the milk run.