Internal 45° connector GF-S
Die-cast aluminium internal 45° connector for the GF-S Ø 19 mm tube system: joins two tubes at 45° while staying flush, with the same outside dimension as the profile. For diagonals, braces and light inclined frames.
Green Frame · GF-S Ø 19 connectors
Internal 45° connector GF-S
The internal 45° connector joins two Ø 19 tubes at an angle of 45° without protruding from the profile. It is the part for the diagonals and braces that stiffen sides and backs, and for the inclined parts of light frames.
Why choose it
Diagonals and braces
Stiffen the sides and backs of light frames.
Flush with the tube
The joint is the same size as the profile.
Lightweight
19 g in die-cast aluminium.
Application example
The internal 45° connector creates diagonals and braces in Ø 19 frames.
- Braces: stiffer sides and backs
- Inclined frames: picking surfaces and light supports
- Exposed structures: joints flush with the tube
Data and compatibility
| Specification | Value |
|---|---|
| Part number | GFJ-248 |
| Series | GF-S (Ø 19 mm tube) |
| Angle | 45° |
| Material | Die-cast aluminium, steel screw and nut |
| Screw | M5 × 12 |
| Weight | 19 g |
A brace needs one connector at each end of the diagonal.
GF-S profileGF-S Ø 19 tube
Internal 90° connector GF-SInternal 90° connector
45° brace GF-SBrace near the cornerNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.