In-line external hinged connector 0–180° GF-N
External hinged joint that joins the ends of two Ø 28 tubes one after the other, with a free angle from 0 to 180° locked by tightening the bolt: for bending a rail, a guide or a handle. 143 g.
Green Frame · Connectors GF-N Ø 28
In-line external hinged connector 0–180° GF-N
The other hinged joints attach the end of one tube to the side of another. This one instead joins two ends: the two tubes continue one after the other and you choose the angle between them, from 0 to 180°. Tightening the bolt fixes the angle. It is for bending a rail, a guide or a handle at the angle you want.
Why choose it
Custom bend
Any angle between two lengths of tube, not just 10° or 135°.
Pull-out lock notch
Takes a 4 × 10 self-tapping screw (Ø 3.5 pilot hole).
Adjustable
Loosen, change the angle, retighten.
Application example
Used to bend a tube into two sections.
- Guides and rails with a change of slope
- Angled handles and handrails
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | In-line external hinged (between the ends of two tubes), 0–180° |
| Compatible with | GF-N Ø 28 pipes |
| Material | Die-cast aluminium, aluminium bolt |
| Weight | 143 g |
| Tightening torque | 11 N·m (5 mm hex key) |
| Screw | M6.5 × 22 in aluminium |
| Part number | GFJ-D53 |
For fixed bends there are the 10° and 135° internal connectors, flush with the tube.
GF-N profileStandard Ø 28 tube
Internal 10° connector GF-NFixed 10° bend
Internal 135° connector GF-NFixed 135° bend
External hinged connector 0–180° GF-N/GExternal hinged joint on the side of a tube
Linear connector GF-NLinear connector, in line at 180°Need help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.