Internal 135° connector GF-N
Internal connector that joins two Ø 28 tubes with a 135° bend, flush with the tube. It is used for trolley handles angled towards the operator and for shaped side walls and guides. Torque 11 N·m, 84 g.
Green Frame · Connectors GF-N Ø 28
Internal 135° connector GF-N
It joins two tubes end to end at an angle of 135°: in practice a 45° change of direction, with nothing protruding. The typical use is the trolley handle bent towards the person pushing, but it also serves for side walls, guides and shaped frames.
Why choose it
Ergonomic handle
The upper part bends towards the operator.
Flush with the tube
The bend stays clean, with nothing protruding.
Precise angle
A fixed 135°, repeatable on all trolleys.
Application example
Used for handles and shaped frames.
- Trolley handles angled towards the operator
- Side walls and guides with a change of direction
Data and compatibility
| Specification | Value |
|---|---|
| Series | GF-N Ø 28 |
| Type | Internal (flush with the tube), fixed 135° bend between two tubes |
| Compatible with | GF-N Ø 28 pipes |
| Material | Die-cast aluminium, aluminium bolt |
| Weight | 84 g |
| Tightening torque | 11 N·m (5 mm hex key) |
| Screw | M6.5 × 18 in aluminium |
| Part number | GFJ-E52 |
For other angles use the in-line external hinged joint, adjustable from 0 to 180°.
GF-N profileStandard Ø 28 tube
Handle connector GF-NHandle connector
Handle grip sleeve GF-NHandle grip sleeve
In-line external hinged connector 0–180° GF-NAdjustable in-line hinged joint
Internal 10° connector GF-NFixed 10° bendNeed help choosing connectors?
Send us a sketch of the structure: we will tell you the part numbers, quantities and cut lengths.