Guard rail for lift tables

Yes: it is mandatory when lifting people and recommended when the lift table carries people or materials between two floors. It is 1100 mm high, with a mid rail and a 150 mm toe board, sized to the platform.

You choose the tube: 30 × 30 mm, or 40 × 40 mm for larger platforms. If access is needed there is the version with a gate; with people on board, also consider the anti-slip deck.

Start from how you will use it: people on board need guard rails and a gate; in a pit, limit switches, lifting eyes, mechanical blocks and an inspection hatch or external power unit; outdoors, an anti-slip deck and a covered power unit; loads that roll need an anti-roll stop, loads to be rotated a turntable. Tell us the model and the use and we will recommend the compatible accessories.

Many, yes: control pendants, limit switches, photocells and other electrical accessories plug into the M12 connectors of the UC-60 control unit, without an electrician and without opening it. The HD kit, anti-roll stop, adjustable mechanical blocks and anti-tip device must instead be ordered with the lift table, as they cannot be fitted later. To check compatibility, give us the model and serial number from the rating plate.