Skip to Content
  1. All Products
  2. AL Modular System
  3. Joints
  4. Joint for strut profiles

Joint for strut profiles

https://leanproducts.eu/web/image/product.template/3577/image_1920?unique=1d9bc53

Die-cast swivel joint for connecting two strut profiles at any angle you want, fixed or swivelling: sections 30x30, 40x40, 45x45 and 60x60, rotation up to 182°, up to 20000 N. Also in support versions with lever and lockable versions with toothing.

Read more ↓
Code: 3842502683
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Section
  • ESD
  • Surface treatment
  • Tightening torque Nm
  • Production method
  • Technical notes
  • Material
  • Dimensions mm
  • Height mm
  • Moment Mmax Nm
  • Slot mm
  • Colour
  • Type
  • Finish
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

ESD yes
Material Die-cast zinc
Surface treatment painted
Dimensions mm 30x30
Moment Mmax Nm 100
Tightening torque Nm 3
Production method Die casting
Technical notes Snodo 182°; F1 10000 N, F2 600 N
Height mm 73
Colour RAL 9006
Section 30x30
Slot mm 8
Type standard
Finish standard
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

Swivel joint 30x30 lockable: M8x30. Swivel joints 40x40 support and 40x40 lockable: M8x40. Swivel joints 45x45 support and 45x45 lockable: M8x45. Zinc swivel joint 45x45 at 182° and swivel joints 60x45 and 60x60: M5x10. If you have a different swivel joint, send us the code and we will tell you the lever.

The standard is adjusted by loosening the screw and locked at 5 Nm: suitable for angles you change rarely. The support has the clamping lever to release and adjust by hand. The lockable has Hirth toothing: the angle is selected in 5° steps and it holds up to 100 Nm in the direction of rotation.

Yes, in the 182° zinc versions (30x30, 45x45 pinnable and 60x60): after adjusting it you fix it with a pin, tightening to 15 Nm. The aluminium versions are locked at 5 Nm or remain swivelling.

It depends on the section: on the 30x30 a D11 through hole is needed for the front connection, with the D11 bolt connector; on the 60x60 the M12 thread in the central hole. The lockable 45x45 is fitted without machining, with a self-tapping screw. Send us the parts list and we will tell you what is needed.

The permissible loads are 10000 N (F1) and 600 N (F2) for the 30x30, 15000 N and 1000 N for 40x40 and 45x45, 20000 N and 1100 N for the 60x60. If the swivel joint carries a cantilever arm, send us the layout with weights and distances: we will help you choose the version.

The swivel joint comes with fastening hardware for the profiles. Clamping levers for the support and lockable versions are separate accessories; the lockable can also be fixed with a screw.

Yes, the lockable 45x45 is compatible with the standard 45x45 swivel joint and the 45x45 support: same section and same mounting dimensions.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products