KAN-Special
Kanban card sleeve like the KAN-Label, with a Euro hole and slot in the head: hang it on hooks and brackets to collect and sort the cards. ET650 card stock, 9 colours, pack of 50.
September 2026 update — part numbers
The part numbers in this series have changed. The products are unchanged.
Kanban system · Card sleeves
KAN-Special: kanban sleeve with Euro hole and slot to hang on hooks and brackets
The hanging kanban sleeve. It is like the KAN-Label, but the head has a Euro hole and a slot: you hang it on hooks, brackets or bars and the cards are collected in a fixed spot, sorted by colour. It can be read with a scanner and takes the ET650 card stock.
Why choose it
Hangs where you need it
Euro hole and slot in the head: the sleeve fits hooks, brackets and wall bars.
Tidy collection
The cards to be reordered are collected in a fixed spot, side by side.
Colour coding
Nine colours to tell departments, lines or suppliers apart on the hook and on the container.
Scanner-readable
Barcodes and QR codes can be read through the sleeve.
Choose it if…
- You want to collect the cards hanging on hooks or brackets, on the wall or at workstations.
- You need a kanban sleeve that also fits on the container.
- You want a colour code for departments or suppliers.
Choose another solution if…
- You need the sleeve to insert into the slots of KLT containers and into boards, without a hole: KAN-Label →
- You want to collect the cards in a mailbox, on the wall or on a magnetic board: Plastic kanban mailbox →
- You want an insert-type kanban board to plan reorders: Cardplan® – insert board →
Not sure which one to choose? Use the selection guide →
How to use the KAN-Special
One sleeve, two places:
- On the container: the card travels with the material, protected and readable
- On the hook: when the container is empty, the sleeve is hung at the collection point
- By colour: one hook or bracket per department, line or supplier
Whoever manages reordering finds all the cards in the same place and takes them to the board or to the purchasing office.
The LeanProducts service
We help you set up kanban, from container to board:
Choosing card holders
We start from your containers, surfaces and card format: we tell you the right card holder for each case.
Colours and cards
We recommend colours by department, line or supplier, and pre-cut cards to print on your office printer.
View product →Boards and collection
Complete the circuit with kanban mailboxes, Cardplan® boards and Systembox, also ready-assembled in the Kanban Starter Set.
View product →Extensions and reorders
When you add containers, lines or suppliers, we confirm the codes and quantities to reorder.
Send us a few photos of your containers and an example of a card: we will suggest card holders, formats and quantities.
Technical data
| Property | Value |
|---|---|
| Code | KNTA-<colour> |
| Dimensions | Inside 150 × 67 mm, outside 209 × 85 mm |
| Card | ET650 (67 × 150 mm) |
| Header | Euro slot and hanging hole |
| Colours (code) | Red 01, white 02, blue 03, yellow 04, green 05, black 06, orange 08, light grey 88, transparent 20 |
| Reading | Barcodes and QR codes readable with a scanner |
| Pack | 50 pieces |
Dimensions are width × height. The inside space is shorter than that of the KAN-Label to leave room for the punched header. Since September 2026 the coding of this series has changed (for example, light grey changes from -07 to -88): the products are unchanged.
CardET650 cards
KAN-LabelVersion without hole
Plastic kanban mailboxKanban mailbox
Cardplan® – Insert boardInsert kanban board
Kanban Starter Set with SystemboxKanban Starter SetAre you setting up kanban in your department?
Tell us how many containers and workstations you have and which cards you use: we will recommend card holders, formats and quantities.