- Products
- Floor Marking
- Floor signs
- Self-adhesive signs
- LongLife Floor Signs - 600 mm
LongLife Floor Signs - 600 mm
https://leanproducts.eu/shop/longlife-floor-signs-600-mm-131 https://leanproducts.eu/web/image/product.template/131/image_1920?unique=d3bbd8eLongLife Floor Plates 600 mm are non-slip adhesive PVC plates designed for permanent floor-level safety marking in industrial environments. Available in 15 graphic variants — including prohibition, mandatory, hazard, and directional symbols — they address the key visual management requirements of production areas, warehouses, and traffic zones. The 600 mm format ensures immediate visibility even under heavy forklift and pedestrian traffic. Sold individually (1 pc/pack).
ORGATEX LongLife · Floor safety signs
Ø 600 mm floor signs: floor safety signs for warehouses and production
Self-adhesive PVC prohibition, mandatory, warning and direction signs, 600 mm in diameter: visible from afar, even for drivers of forklifts or floor scrubbers. The print is protected by a 3-layer structure, the back is fully adhesive and they can be driven over. 16 signs available.
Why choose it
Visible to drivers
At 600 mm in diameter the sign can be read from afar, even from the driver’s seat of forklifts, work machines and floor scrubbers.
Print that does not wear off
3-layer technology with reverse printing: the pictogram is protected from abrasion and stays clearly visible for a long time.
Walk-on and drive-over
Tough PVC, slip-resistant surface and a fully adhesive back: it can be walked on and driven over, forklifts included.
Standard pictograms
According to ORGATEX the warning and mandatory signs comply with ASR A1.3 (DIN EN ISO 7010).
Choose it if…
- You need to signal a prohibition, obligation or hazard at a specific point
- Forklift and machine drivers must see the sign
- Junctions, department entrances, areas where PPE is mandatory
- Even, clean, grease-free floor
Choose another solution if…
- if the floor is rough or textured: raw concrete, asphalt, MMA coatings, tiles, concrete pavers LongLife Rough Ground - Floor Signs - 600 mm →
- if the sign goes against a wall or door, for extinguishers, electrical panels and exits LongLife Floor Signs - Half Circle - 900 mm →
- if you need to mark a pedestrian crossing LongLife CrossWalk →
- if escape routes must be visible in the dark too Photoluminescent tapes →
Not sure? Use the selection guide →
Prohibition and warning signs

No smoking
Warehouses, flammable material stores, charging areas.

No entry
One-way aisles and passages that must not be entered.

No forklift trucks
Walkways, offices and departments that forklifts must not enter.

No pedestrians
Forklift-only aisles, loading bays, manoeuvring areas.

No unauthorised access
Plant rooms, test areas, restricted zones.

No stopping
In front of doors, exits and junctions that must stay clear.

Warning: forklift trucks
Junctions, aisle exits and blind spots.

Warning: slippery surface
Wash areas, entrances, floors that are often wet or oily.
Mandatory, stop and direction signs

Wear high-visibility clothing
Areas with forklift traffic and loading bays.

Wear eye protection
Entrances to departments where work puts eyes at risk.

Wear hearing protection
Entrances to noisy departments.

Wear safety footwear
Entrances to warehouses and production departments.

Wear a safety helmet
Areas with suspended loads or high racking.

Stop
Crossings between forklift aisles and walkways, department exits.

Permitted direction
Shows the direction of travel in one-way aisles.

Pedestrian walkway
Marks walkways reserved for pedestrians, together with floor lines.
For rough or textured floors the same signs are available in the Rough Ground Ø 600 mm version.
Technical data
| Signs | No Smoking, No Entry, No Access for Forklift Trucks, No Access for Pedestrians, No Access for Unauthorised Persons, No Stopping, Permitted Direction, Wear High-Visibility Clothing, Wear Eye Protection, Wear Ear Protection, Wear Safety Footwear, Wear Head Protection, Stop, Warning: Industrial Trucks, Warning: Slippery Surface, Pedestrian Crossing |
| Pack | 1 pc |
Diameter 600 mm, PVC with fully adhesive back, sold individually. For good adhesion the floor must be even, clean and free of grease when the sign is applied.
Accessories and related products
Which signs does your department need?
Send us the layout or a few photos of aisles and junctions: we will help you choose signs, lines and application accessories.
Specifications
| Signs | No smoking or No entry or No access for forklift trucks or No access for pedestrians or No access for unauthorised persons or No stopping or Permitted direction or Wear high-visibility clothing or Wear eye protection or Wear ear protection or Wear safety footwear or Wear head protection or Stop or Warning: industrial trucks or Warning: slippery surface or Pedestrian crossing |
| Pack | 1 pc |
| Tags | |
|---|---|
| Tags |
Orgatex
|
According to ORGATEX the warning and mandatory signs comply with ASR A1.3 (DIN EN ISO 7010), the German technical rule on safety signs.
Yes: the sign is made of tough PVC with a fully adhesive back and can be driven over, forklifts included. The reverse print, protected by 3 layers, resists abrasion.
Yes: for rough or textured floors, such as MMA coatings, anti-slip floors, tiles and concrete pavers, ORGATEX makes the same signs in a Rough Ground version, with high adhesion on rough substrates: you will find the Rough Ground Ø 600 mm signs among the alternatives on this page. The standard version is applied on even floors.
Prohibition: no smoking, no entry, no forklift trucks, no pedestrians, no unauthorised access, no stopping. Warning: forklift trucks, slippery surface. Mandatory: high-visibility clothing, eye and hearing protection, safety footwear, helmet. Traffic: stop, direction of travel, pedestrian route.
The 600 mm circle goes wherever it is needed, including the middle of aisles and junctions. The 900 × 450 mm half circle sits against a wall or door and suits extinguishers, electrical panels and exits.
The floor must be even, clean and free of dust, oil and grease. First clean thoroughly, then degrease the application strip with LongLife Cleaner. Remove old markings with the scraper and adhesive residue with LongLife Remover. On critical surfaces, such as porous or dusty concrete, LongLife Primer increases adhesion; outdoors it is always required.
Yes. Send us a floor plan or a few photos of the areas to be marked or made safe and tell us how they are used (traffic, vehicles, floor, stairs, exits): we will recommend the right products, with colours, formats and quantities. For larger sites or special situations we can consider a site visit on request.



