LongLife Heavy Duty – Rounded Floor Marking Symbols

September 2026 update — part numbers

The part numbers of this range have changed. The products themselves are unchanged.

-10 → -07

ORGATEX LongLife Heavy Duty · Rounded shapes

Heavy Duty Rounded shapes: 90 mm pieces with rounded edges for heavy traffic

Intensive forklift traffic stresses the corners and edges of floor marking most. Heavy Duty Rounded shapes combine the rigid, robust material of the Heavy Duty line with rounded contours: less lifting, longer life and locations that stay readable in the busiest areas, on smooth concrete or epoxy floors.

For heavy forkliftsRounded edges90 mm wideT, L, straight and dot20 pieces per pack

Heavy Duty Rounded shapes: 90 mm pieces with rounded edges for heavy traffic

90 mmwidth

4shapes

8colours

20pieces per pack

30–50 mmgap between pallet and shapes

For which traffic: Heavy Duty line

Pedestrians

Manual and electric pallet trucks

Forklifts

Heavy forklifts

Forklifts turning on the spot

Thickness 1.3 mmMaterial PVC filmOperating temperature -20/+70 °CApplication temperature 18–25 °C

Compare all lines →

Why choose it

Less edge lifting

Without sharp corners, forklift traffic has less grip on the edges: the shape reduces lifting and extends service life.

Heavy Duty toughness

Rigid material with bevelled edge, high-tack adhesive and high abrasion resistance for heavy traffic.

Dot included

The 90 mm dot marks precise positions of containers, equipment or trolleys.

Machine cleaning

Marked areas can also be cleaned with floor-cleaning machines.

Choose it if…

heavy forklifts or high loads pass
you want rounded edges that lift less
you need 90 mm shapes, including a dot
the floor is smooth concrete or epoxy, indoors

Choose another solution if…

if 50 mm pieces with sharp corners are enough LongLife Heavy Duty - Symbols →
if forklifts turn on the spot over the shapes LongLife Vector - Rounded Symbols →
if traffic is normal LongLife Standard - Rounded symbols →
if locations are in block storage with very high point loads, or the floor is oily or uneven: plastic modules fixed with anchors LongLife - Modul →

Not sure? Use the selection guide →

Four 90 mm shapes

For pallet locations and storage zones under heavy traffic. Leave 30–50 mm between pallet and shapes.

L piece

Corners of pallet locations and storage zones.

T piece

Shared side between two adjacent locations, or where one line joins another.

Straight piece 90 × 450 mm

Long sides and dashed lines between areas.

Dot

Position of containers, equipment or trolleys; in a row, a dotted line.

Technical data

Colour	Red, White, Light blue, Yellow, Green, Black, Dark blue, Orange
Shape	T element, L element, Straight element, Round element
Pack	20 pcs

All shapes are 90 mm wide; straight piece 90 × 450 mm. Pack of 20 pieces per shape and colour, 8 colours. For smooth concrete or epoxy floors, indoors.

Images and applications

Other formats in the Heavy Duty line

LongLife Heavy Duty - Roll

LongLife Heavy Duty - Symbols

LongLife Heavy Duty - Aluminium protective screen

Accessories and related products

LongLife - ModulPlastic modules fixed with anchors

LongLife Standard - Protective screensFloor location code, scanner-readable

LongLife - Pressure RollerEven pressure when applying

LongLife - Remover, Cleaner, Primer & Edge SealingClean floor before application

Any other questions?Read the 11 frequently asked questions →

Is your floor marking wearing out fast?

Send us a few photos of the damaged marking and the traffic in the area: we will tell you whether you need Vector™, Heavy Duty or whether Standard is enough.

Request a quote Call +39 0434 572757

Specifications

Colour	Red
Shape	L-shaped element
Pack	20 pcs

Tags
Tags	Orgatex

Intensive forklift traffic mainly stresses corners and edges. Rounded contours reduce lifting, extend service life and keep location marking clean.

20 pieces per shape and colour. The shapes are T piece, L piece, 90 × 450 mm straight piece and dot, all 90 mm wide, in 8 colours.

Heavy Duty if heavy forklifts with high loads pass; Vector™ if forklifts turn on the spot over the shapes. In the ORGATEX table neither line covers both situations.

In Italy, Legislative Decree 81/08 (Annex XXVIII) requires that, where the use of the premises makes it necessary, vehicle traffic routes are marked with continuous lines in a clearly visible colour, preferably white or yellow depending on the floor, and that obstacles and danger points are marked with yellow/black or red/white bands angled at about 45°. Signs follow Annex XXIV: red for prohibitions, yellow for warnings, blue for mandatory actions, green for escape and first aid. Other colours (for example blue for raw materials, green for finished goods, red for scrap) are not set by law: they are an internal code to define and apply consistently.

The floor must be even, clean and free of dust, oil and grease. First clean thoroughly, then degrease the application strip with LongLife Cleaner. Remove old markings with the scraper and adhesive residue with LongLife Remover. On critical surfaces, such as porous or dusty concrete, LongLife Primer increases adhesion; outdoors it is always required.

Yes. According to ORGATEX, LongLife markings can be removed without residue using LongLife Remover. Markings are lifted with the LongLife scraper, 1200 mm long so you can work standing up, with a 125 mm blade and 3 spare blades; adhesive residue is dissolved with the Remover. On delicate floors test it in a hidden spot first.

Adhesive marking has no drying time: tapes and symbols are applied without chalk lines or special equipment and the area can be used straight away (the adhesive bonds fully in about 12 hours). When the layout changes it is removed without residue with LongLife Remover, and colours stay standard and consistent in repeat orders. Choose the line by traffic and floor: if in doubt, we will recommend it.

Yes: LongLife tapes and symbols are stated to be resistant to abrasion and washing; for the symbols machine washing is explicitly declared too. After application it is best to wait the roughly 12 hours the adhesive needs to bond before the first machine wash.

Yes, on request. ORGATEX makes LongLife Individuell tape in 50, 75 or 100 mm with custom colours, symbols or QR codes, and custom shapes in any form, size, colour and material: also with anti-slip surfaces, adhesives for rough floors or photoluminescent materials. Send us the drawing and quantities: we will prepare a quote with delivery times.

Yes. Send us a floor plan or a few photos of the areas to be marked or made safe and tell us how they are used (traffic, vehicles, floor, stairs, exits): we will recommend the right products, with colours, formats and quantities. For larger sites or special situations we can consider a site visit on request.

You can use pre-cut pieces – 45° and 90° corners (Standard), T and L pieces (Standard, Vector™, Heavy Duty, Cold Performance), crosses (Standard and Vector™ Rounded) – or cut the tape with the stainless steel LongLife cutting template, which guides 90° and 45° cuts on 50, 75 and 100 mm widths. For 10 pallet locations there is the marking kit (L corners, straight pieces and A4 screens); on uneven floors or outdoors, LongLife Modul L corners fixed with anchors. ORGATEX recommends not overlapping markings.

LongLife Heavy Duty - Rounded Symbols

Documents