Skip to Content
  1. All Products
  2. AL Modular System
  3. Connection elements
  4. Connectors and fittings
  5. Mitre bracket

Mitre bracket

https://leanproducts.eu/web/image/product.template/2907/image_1920?unique=1d9bc53

Mitre bracket for joining mitre-cut profiles with slot C6, C8 or C10 at right angles: plate with four set screws, no machining on profiles with open slots. Stainless steel in C6, zinc-plated in C8 and C10.

Read more ↓
Code: 3842535626
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • ESD
  • Slot
  • Surface treatment
  • Tightening torque Nm
  • Production method
  • Technical notes
  • Material
  • Dimensions mm
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Slot C6
ESD yes
Material Stainless steel
Surface treatment Zinc plating
Dimensions mm 46x46
Tightening torque Nm 2.5
Production method Moulding
Technical notes Mitre bracket; incl. 4 screws FS1 M4x5 ISO 4027
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

Through holes are needed to reach the set screws with the screwdriver: Ø 4.5 mm in the 20x20, Ø 8.5 mm in the 30x30, Ø 10.5 mm in the 40x40, 45x45 and 50x50 profiles. The drilling jig helps you make them in the right position.

The mitre bracket joins two mitre-cut profiles forming a right angle, as in the border of a frame. The 45° connector, on the other hand, connects a diagonal reinforcing profile between two sides of the frame.

The one for the profile slot: C6 for the 20 series, C8 for the 30 series, C10 for profiles from 40 upwards. The C6 is stainless steel, C8 and C10 zinc-plated steel.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Accessory Products