Sealing profile for slot C8 C10

AL Modular System · Doors and hinges

Sealing profile for slot

The sealing profile is inserted into the frame slot and closes the gap between leaf and structure, on sliding and hinged doors. It keeps dust and particles inside or outside the protected area and is suitable for use in clean rooms. Supplied in a 10 m length, to be cut into the sections you need.

Slot C8 and C10Black NBR5 mm gapL 10 mClean room

Why choose it

Keeps particles out

Prevents particles from entering or escaping through the door gap.

Sliding and hinged doors

Fitted in the frame slot, along the closing edge.

Custom lengths

From the 10 m length you cut the sections you need.

Data and compatibility

Property	Value
Slot	C8 (shape C) · C10 (shape D)
Material	Black NBR, hardness 60 Shore A
Gap to close	5 mm
Length	10000 mm
Application	Sliding and hinged doors, also in clean rooms
Versions	2 codes: C8 (3842516598) · C10 (3842518492)

Choose the variant above: data and code update in the Specifications tab.

Related products

Hinge, die-cast aluminiumHinge, die-cast aluminium

Aluminium strut profile 30x30Profile 30x30, slot C8

Aluminium strut profile 45x45Profile 45x45, slot C10

Any other questions?Read the 10 FAQs →

Need help with your profile parts list?

Send us a sketch or the parts list: we will give you codes, accessories and cut lengths.

Request a quote Call +39 0434 572757

Specifications

Slot	C8
Material	NBR
Technical notes	Profilato di tenuta per porte, durezza 60 Shore A
Colour	black
Length mm	10000
Brand	Bosch Rexroth
Shape	C (black NBR)

Tags
Tags	Bosch 5S1

It depends on the frame slot: shape C is for slot C8, shape D for slot C10. Both close a 5 mm gap.

Yes, for slot C6 there are sealing profiles in light grey TPE, also in two parts with a stop function. They are not on this product page: ask us for the code.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.

Sealing profile for slot