Skip to Content
  1. All Products
  2. AL Modular System
  3. Joints
  4. Swivelling support pedestal

Swivelling support pedestal

https://leanproducts.eu/web/image/product.template/3581/image_1920?unique=1d9bc53

Die-cast zinc swivelling support pedestal for 45x45 profiles with slot C10: carries heavy superstructures that must be tiltable, up to a moment of 400 N·m. Clamping lever included.

Read more ↓
Code: 3842547868
from
not with
options
Prices per piece + VAT
Prices per pack of %s + VAT
Prices per pack of %s pcs + VAT
colors
only
of
available
  • Production method
  • Slot mm
  • Moment Mmax Nm
  • Surface treatment
  • Technical notes
  • Dimensions mm
  • Colour
  • Finish
  • Material
  • Brand

This combination does not exist.

Log in to see prices and buy
You have already submitted a query for this product today.
Bosch 5S1
Contact Us
Request a quote
We reply within 1 working day
Download PDF data sheet

Specifications

Production method Die casting
Moment Mmax Nm 400
Surface treatment painted
Dimensions mm 45x45
Technical notes Piedistallo di supporto orientabile, versione Standard
Colour RAL 9006
Finish standard
Slot mm 10
Material Die-cast zinc
Brand Bosch Rexroth
Tags
Tags
Bosch 5S1

Multiply the load force by the distance from the pedestal: the result must stay within 400 N·m. For example 400 N (about 40 kg) at 1 m, or 800 N at 0.5 m. If the load is close to the limit send us the drawing and we will check it.

The swivel joint connects two profiles at any angle. The support pedestal is designed for heavy superstructures that need tilting, with a lever to lock them by hand. If the cantilevered load is high, start with the pedestal.

It is the width of the profile slot and determines which accessories you use. Slot C6 (6 mm) is for 20 series profiles, C8 (8 mm) for the 30 series, C10 (10 mm) for profiles from the 40 series upwards. Nuts, screws, brackets and cover caps are chosen by slot: each accessory's product page shows the right one.

Yes. You can order the full bar or the piece cut to the length you need: we do the cutting ourselves, in our workshop. Each profile's product page shows the maximum bar length and the minimum cut length.

Look at the moments of inertia Ix and Iy: the higher they are, the less the profile deflects under load. For the same section, “L” profiles are lightened and deflect a little more. For long spans or high loads move to a larger section or a tall profile (e.g. 45x90 instead of 45x45). If you send us drawing and loads, we will check the choice.

The T-nut is inserted from the front into the slot, even in an assembled structure, and positions itself when you tighten the screw: it is the standard choice for fixing accessories. The sliding block withstands higher forces, but normally has to be inserted from the profile end before closing the frame; spring versions stay where you put them.

The simplest way is the bracket, which joins two profiles at 90° with screws and nuts in the slot, without machining. For end, T, 45° or three-way connections there are dedicated connectors, some of which require profile machining as stated on their product page.

Yes, for several accessories (for example cover caps, hinges and nuts) there are conductive ESD versions, indicated in the name or variant. Tell us which EPA area you work in and we will confirm the components to use.

On each product page you will find the MGE catalogue pages to download as PDF, with dimensioned drawings and technical data; the Specifications tab shows the data for the variant you have chosen.

Yes. Send us the parts list or a sketch with dimensions: we give you codes, quantities and cut lengths and prepare the kit with profiles already cut and the accessories.